Review of Curt RV and Camper Hitch - Frame Mount Hitch - C13704 Video

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a…

I went out to the warehouse and measured Curt trailer hitch #C13704 for you. The distance from the top of the mounting flanges to the top of the cross tube is 2 inches. I have included some pictures with additional measurements for you.

On Ultra-Fab trailer hitch #UF35-946403 the brackets that make contact with the frame are 4 inches by 3 inches. The hitch opening sticks out 5-1/4 inches from the main tube of the hitch as well.

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide, #C13704 has brackets that will mount to the bottom of the frame. The square tubing sets within these brackets which extend toward the inside of the frame. If you…

For an I-beam frame trailer I have a better solution than the #UF35-946403 that you referenced. Instead you would want the part #13703. I attached a picture that I took from that attached install instructions that shows how it would install on an…

It is not recommended to reverse the brackets on the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703 because the inside of the bracket has a necessary support tube. If you look at the attached installation…

The side camera (or any of your cameras) can be paired with more than one monitor but not at the same time. You cannot pair your camera(s) to both your 7 inch and your 5 inch monitors. It's basically the same concept as trying to pair two…

The Curt Adjustable Width Trailer Hitch Receiver #C13704 referenced in your question features a 5,000 pound towing weight capacity and a 500 pound tongue weight limit. I verified this with Curt. This adjustable hitch is designed for use on trailer or…

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

I attached two picture for the Curt hitch part #C13704 that have all of the dimensions on it. I believe you also asked for the distance from the crosstube to the front of the mounting bracket. Which if so, that distance is 2 inches. The third picture…

The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider part #DM8550024 is a better option for an auto slide compared to the Pullrite SuperGlide because the Hijacker has 3 different height settings 15-1/2", 16-3/4", and 18-1/4" compared…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…