Curt Adjustable Width RV Trailer Hitch Installation - 2009 Chevrolet Kodiak Video

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a video to…

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider part #DM8550024 is a better option for an auto slide compared to the Pullrite SuperGlide because the Hijacker has 3 different height settings 15-1/2", 16-3/4", and 18-1/4" compared…

Since the markings and numbers are weathered away on your pin box you can measure the bolt pattern to find the correct replacement. I've attached a picture and our help guide to help you with these measurements. Once you have the measurements I…

The Curt Adjustable Width Trailer Hitch Receiver #C13704 referenced in your question features a 5,000 pound towing weight capacity and a 500 pound tongue weight limit. I verified this with Curt. This adjustable hitch is designed for use on trailer or…

I'm assuming you mean you have a 63" gap between the two frame beams which would allow you to use the Curt Adjustable Width Trailer Hitch Receiver for RVs #C13704. The mounting brackets for this hitch can be installed on the bottom of your…

I attached a picture I received from Draw Tite that shows the dimensions of Draw Tite hitch part #82201 that you are looking for.

Most states do allow you to tow a trailer behind a trailer as long as it does not exceed a certain overall length- I believe California has a limit of 65 feet total length of all 3 vehicles. You would need to consult with your State's laws and…

For your 2016 Winnebago Micro Minnie Travel Trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver #13703. This Class III hitch is specifically designed for use on trailers like yours and will install on frame widths of 22 inches to 72…

The Swagman Around the Spare #S80501 is not designed to hold the bikes at the wheels, but is a hanging-style rack that will support the bikes by the upper frame bar. I have a co-worker who uses this bike rack on the back of his 5th wheel camper and…

The only trailer hitch available or a 2020 Chevrolet Express Van Shuttle Bus is the Buyers Products 2" Hitch Receiver part #3371801102. The Buyers Products 2" Hitch Receiver does require drilling but there is no other option for this. The…

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…