Fifth Wheel and Gooseneck Wiring Harness Installation - 2006 Ford F-350 Video

There is power running to both sides at the same time on the Pollak 7- and 4-Pole Trailer Connector #HM40975. However, using both at the same time could result in over drawing power which could lead to blown fuses, electrical fire, accessories not…

If you check out the video I attached you can see how 7-way harnesses like the one you referenced disconnect at the rear of them. Right at the 46 second mark you will see the pin that has to get removed.

We do have a replacement wireless remote for the Lippert Ground Control 3.0 #LC358590, for that you would want the part #LC358601. Here is how the remote would get programmed: 1. Enter the Leveler app on the LINC Remote. 2. Turn the remote on by…

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

How is the 7-way in your truck bed installed? Is it a T-connection like the #PK11893-11932 you referenced? If so, unplug the fifth wheel connector portion of it entirely and plug the factory US car connector into the rear of the 7-way on the rear…

I have attached a drawing of the rear view of the socket included with the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole, part #PK11893-11932. This is a confirmed fir for your 2006 Ford truck. As the drawing shows the numbers at the back of…

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which…

The auxiliary or back-up wire on a 7-way trailer connector like #HM20041, is used to power to things like interior trailer lights or other 12V accessories. It can also be used to power backup lights, but not many trailers are equipped with those.…

If you were wanting to just plug in your current 7-Way on your popup to a 7-Way that is connected to your auxiliary battery then you could install the Hopkins #HM47210 on your trailer. Then you would need to ground the white wire to a clean,…

The white, red, and blue wires of the Hopkins 7-Way part #HM47210 are 12 gauge and the yellow, green and brown wires are 14 gauge.

The Pollak part #PK11893-11932 would install in line with the 7-way portion of the trailer wiring you have at the rear of your 2015 Chevy Silverado 3500. If there is only one round connector at the back of the entire harness it would plug in line…

To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them. We don't have a way to look up what your trailer had in the hubs. Or, you can measure the spindle…