etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2020 Hyundai Santa Fe Video

The weld nuts in your 2012 Hyundai Santa Fe will use Grade 5 bolts that are M10- 1.25 x 30. There is also another bolt, washer, and nut on each side required for the installation of the Curt #C13073. The Draw-Tite Max-Frame Trailer Hitch Receiver -…

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

First you would need a 4-way for your 2017 Hyundai Santa Fe to start for trailer wiring. For that you would need the part #C56332. Now if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a…

The Brake Controller Install Kit part #ETBC7 that you referenced would be easily installable by a local mechanic to you. It's a pretty basic wiring job that wouldn't be too hard at all. I attached an install video that shows the kit being…

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV works better with a weight distribution system. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily designed for minor…

Since there aren't any 7-Way trailer connectors that will plug into the 2015 Hyundai Santa Fe you will need to hardwire one in. Half the work is already done since you have a 4-Way installed already. All you will need is kit #ETBC7 to add a 7-Way…

Water and electricity don't really get along. That being said, we are seeing more trailer boat manufacturers install electric brakes on their trailers and it not being an issue at all. If the wiring is solid the circuits don't short out.…

The Curt Echo Brake Controller part #C51180 is a great choice because of its convenient and simple installation. The 7-way connector that you mention part # A10-7084VP pugs into the 4-way connector you purchased part #C56217. The white wire from the…

Yes you can install and use the Autowbrake Electric Brake Controller #3430001 with your 2005 Ford F-250. The factory brake controller will not be a factor since the Autowbrake will override any signal coming from your factory brake controller! I have…

In order to install a 7-way trailer connector on a 2022 Mazda CX-9 you'll need to start with a 4-way, the T-One Vehicle Wiring Harness for Factory Tow Package part #118278 which is plug-in-play. Then you can adapt this into a 7-way using the 4 to…

We have what is needed to add a 7-Way connector. If you already have the flat 4 plug in place, the easiest solution to get to a 7-Way adapter is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation, #ETBC7L. The pre-wired 7- and 4-way…

When using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation #ETBC7 to install the Curt Echo Mobile part #C51180 you can just tape up the blue wire of the adapter as it would not be used.