Install Instructions/Video for Brake Controller in 2017 Hyundai Santa Fe

Question

Question:

If I order the following ETBC7 and 90195 will I be able to have a local technician install on this Santa Fe Sport? It has a hitch and a 4 prong currently installed. Is there written documentation or instruction with these items?

asked by: Bob H

0

Expert Reply:

The Brake Controller Install Kit part # ETBC7 that you referenced would be easily installable by a local mechanic to you. It's a pretty basic wiring job that wouldn't be too hard at all.

I attached an install video that shows the kit being installed on a similar 2014 Santa Fe as yours for you to check out as well as a set of install instructions.

expert reply by: Jameson C

0

Answer 1

First you would need a 4-way for your 2017 Hyundai Santa Fe to start for trailer wiring. For that you would need the part #C56332. Now if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a…

view full answer...

Answer 2

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV works better with a weight distribution system. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily designed for minor…

view full answer...

Answer 3

The Curt Echo Brake Controller part #C51180 is a great choice because of its convenient and simple installation. The 7-way connector that you mention part # A10-7084VP pugs into the 4-way connector you purchased part #C56217. The white wire from the…

view full answer...

Answer 4

Yes you can install and use the Autowbrake Electric Brake Controller #3430001 with your 2005 Ford F-250. The factory brake controller will not be a factor since the Autowbrake will override any signal coming from your factory brake controller! I have…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

Yes you can.

view full answer...

Install Instructions/Video for Brake Controller in 2017 Hyundai Santa Fe

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching