Parts Needed to Add a 7-Way to a 2017 Hyundai Santa Fe

Question

Question:

Hello. I just got a Hyundai Santa Fe Ultimate model and need a 7 pin connector and hitch for my camper trailer. I know I will need to install the tow hitch but I am not sure how would I add the 7 pin connector to the Hyundai, can you help? Thanks

asked by: Simon

0

Expert Reply:

First you would need a 4-way for your 2017 Hyundai Santa Fe to start for trailer wiring. For that you would need the part # C56332.

Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.

If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

expert reply by: Jameson C

0

Answer 1

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV works better with a weight distribution system. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily designed for minor…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Curt Class III hitch part #C13153 is a fit for your 2017 Hyundai Santa Fe with dual exhaust. We had the chance to install this on a Santa Fe like yours with dual exhaust and we found it fit and worked well. See attached picture and install video…

view full answer...

Answer 4

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

view full answer...

Answer 5

For your 2017 Hyundai Santa Fe XL Limited I recommend starting with the Curt Trailer Hitch Receiver 2" #C13153. This will give you a strong hitch and will allow your spare tire to be reinstalled without any issues. For your wiring, I recommend…

view full answer...

Answer 6

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 7

The trailer hitches we have available do not include a trailer wiring harness. For your 2018 Hyundai Santa Fe Limited Ultimate, I recommend the Curt Class III Trailer Hitch Receiver #C13153. This Class III hitch is confirmed to fit your vehicle and…

view full answer...

Answer 8

If you have 4 load range C, ST205/75-15 tires, that is more than enough for 2,000 to 2,500 pounds. Each tire should have a capacity of 1,820 pounds at 50 psi. Trailer tires should always be inflated to their maximum psi rating for best performance…

view full answer...

Answer 9

For your adapter from the 4-way to a 7-way, I recommend the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole #37185. This will give you the option of adding the 12V power, the brake controller output, and the reverse lights. Even if you don't add…

view full answer...

Answer 10

For your 2017 Hyundai Santa Fe the etrailer hitch part #e98841 is the correct 2 inch hitch fit and then for a 4-way the kit you would want is the part #118571.

view full answer...

Parts Needed to Add a 7-Way to a 2017 Hyundai Santa Fe

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching