Trailer Hitch Installation - 2012 Chevrolet Silverado - Curt Video

The Curt Trailer Hitch ##C13902 is called a multi-fit hitch, which is just another way of saying it is universal so yes, it will fit your 2012 Chevy Silverado 1500 LS. I have attached a link to the installation instructions for you to check out so…

The etrailer Trailer Hitch Receiver part #e98849 will be an excellent replacement hitch option for the factory hitch on a 2012 GMC Sierra 1500. It will provide a direct bolt-on swap with no drilling required. It's rated for up to 10,000 lbs which…

As long as the bolt pattern is the same and you have enough room all around the existing tires for the larger size then yes, you can go to a 15 inch wheel and tire. There are a couple other things you will want to look at though. If the wheels attach…

Part #14301 fits the following vehicles, 2007 New Body Style 1500 Chevrolet Silverado and 2008 1500 Chevrolet Silverado.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Hey Terry, The Blue Ox Avail Non-Binding Tow Bar #BX7420 is rated for 10,000lbs so it would be capable of handling the weight of your 2012 Chevy Silverado 2500HD. To attach it to your truck you'll need a Blue Ox baseplate like part #BX1694. This…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…