Curt Fifth Wheel Kit Installation - 2017 Chevrolet Silverado 2500 Video

The gross vehicle weight rating or GVWR is the most the trailer can weigh fully loaded. In regards to choosing a fifth wheel hitch for a trailer, you'll need to be rated above this figure. For example, if the trailer has a GVWR of 16,190 lbs…

You definitely want to make sure that your hitch (5th wheel and/or bumper pull) is rated for more than the GVWR of your trailer. If you had a bumper pull that was rated a few hundred pounds over the GVWR of your trailer then I would say that you are…

As long as your Pullrite Superglide hitch is part of the ISR series, not all 2700 series are so you will need to verify, then the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt Item #BWRVR3200, will work. If…

Based on my research, your model 2700 PullRite SuperGlide Fifth Wheel Trailer Hitch is compatible with industry standard, above bed base rails. This means that the hitch will in fact work perfectly with the Curt Custom Fifth Wheel Installation Kit…

The Pullrite 2700 Superglide is designed to fit the industry standard rail designs like what are in the #C16411-204 that you mentioned. This rail kit is also a confirmed fit for your 2017 Chevy Silverado 2500HD. I attached an install video for this…

The Q series of Curt fifth wheel hitches are considered to be the nicer Curt fifth wheel hitch when compared to the E16 hitch. Biggest difference being the jaw design. The E16 #16516 uses a slide bar jaw design that allows quite a bit more movement…

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which…

The Andersen Ultimate Connection #AM3200 will fit your 2014 Ford F350 assuming that your Pullrite was installed with Industry Standard Rails (See photo below). If you don't have that kit on your F350, use Custom 5th Wheel Installation Kit…

The only Pullrite Super Glide fifth wheel hitch that will work with either the Curt #C16427-204 or Reese #RP50054-58 custom base rails is the Pullrite that is the ISR Series (the ISR stands for "industry standard rails"). Though we do not…

If the Pullrite Superglide is an ISR style fifth wheel hitch which is designed for the rails that the Curt kit part #C16411-204 provides this will work. But there are two types of rails Pullrite designs their hitches for with one of them being for…

For RV application I prefer the Go Power brand of products. If your camper is pre-wired from Jayco I believe they are using the same brand. There is typically two options available in pre-wired from the factory for "solar ready" either…

Yes, the Curt Fifth Wheel Installation Hardware part #C16411-204 that you referenced has been confirmed to fit a Pro Series 15k Fifth Wheel Hitch like what you have. The rails of this hardware kit are confirmed to fit Curt, Draw-Tite, Hidden Hitch,…