Bulldog Easy Access Trailer Coupler Lock Review Video

The male thread of the Replacement Adapter Fitting #T4871700 being longer would not be an issue when installing it in the back of the Dexter actuator part #K71-650. Pressure from the male side flare fitting to the actuator is what seals it so the…

It sounds like you have a Collar-Lok coupler such as #BD028244. For that type of coupler you could use lock #BLTL-23. The body is aluminum but the pin inside that goes way up into the coupler is steel. It fits 2-5/16 inch Collar-Lok couplers. For 2…

Actually you can add an electric lockout to the Demco actuator part #DM72VR pretty easily with the part #DM5836 and you'd be set!

To add reverse lockout to the Demco Hydraulic Trailer Brake Actuator - Drum Brakes - Zinc Plated - 2" Ball - 6,000 lbs 8605001 you purchased you will need the Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass…

Since the Demco Hydraulic Brake Actuator #DM8759812 is a DA91 actuator the Reverse Lockout Solenoid Kit #DM5837 will fit. I confirmed this with my contact at Demco.

If you really wanted to you could remove the 1-7/8 inch ball of the Flint Hill Goods Trailer Dolly part #FHG24ZR and install a different ball size...BUT it won't gain you anything by doing so and would only prevent you from using it with a…

For the Demco #DM13689-95 eZ-Latch coupler, we recommend the #e98887 which would install into the hole indicated in the photo I've provided.

The Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2-5/16" Ball - 12,500 lbs #CA-5296-B you were looking at is designed to be welded on and as you noticed, does not have the bolt holes available. Instead I recommend going with the…

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

The best trailer tongue jack option we have for low ground clearance situations is the Ultimate Trailer Jack part #322-RDJ-2K since you can retract the jack body all the way up in the mounting flange. It would be a perfect option and helps cut down…

We can get both of your axles set up with disc brakes, and for 3,500 lb axles, since you are converting to disc brakes you'll need a hub-and-rotor disc brake assembly. For the correct kit, as well as the disc brake actuator and brake lines, here…

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.