Trailer Brake Controller Installation - 2004 Ford F-150 3035-P Video

If you are just needing a 7-Way to activate the lights on your trailer then you will simply need to use the Hopkins #37185 that you referenced along with a No-Drill Mount Bracket #18140 as depicted at the start of the attached installation video on…

The brake controller installation on your 2006 F150 is pretty easy. The connector for the brake controller is located under the dash, behind and to the right of the OBD port as shown in the video I've linked for you. You'll need the…

For your 2004 Ford F-150 with the factory tow package, if the tow package included a 7-Way trailer wiring harness you will just need a brake controller and the appropriate adapter for your truck. For a brake controller I recommend the P2, #90885.…

To charge the battery in the Engager Trailer BreakAway Kit, #20099, you can attach the wire from the 12 volt circuit on the trailer side 7-Way (1 oclock position on the back of the trailer side 7-Way where the wires attach) to the input wire on the…

The battery on the trailer will not charge if it is attached to the 12V power wire from the towing vehicle. It will provide a small amount of current that helps maintain the current charge of the trailer battery. I recommend using a battery charger…

I recommend the Hayes - Proportional Trailer Brake Controller, #HA81742B. This has the same connection as the Hayes Time Delayed Brake Controller, #HA81760. If you have the, #HA81760 or one with the same connector, they are interchangeable. Please…

The 7-way wiring harness kits offered for your 2008 Ford F-150 are shown on the linked page and all include both the wiring harness portion and the trailer connector as well, such as PK11893-11932 from Pollak. Both of these use a standard round U.S.…

The logic box that you are asking about is our Pacer Performance 3rd Brake Light Logic Module #PP20-702. This is a piece of equipment that is required when using an LED light as a 3rd brake light. If there is a specific light style that you are…

Those are Warner trailer brakes. This style is not made anymore and replacement parts are hard to find. We have some parts for the larger Warner assemblies but NOT the 12 x 2 inch ones. Most people end up replacing them. You will have to have…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

The part #HM40975 normally would plug right in to the 7-way wiring of your 2005 Ford F-250, but if for some reason you have a totally hardwired setup your other solution would be to use the part #HM40975-11998 which would allow you to hardwire the…

According to the installation instructions for the Curt T-Connector Vehicle Wiring Harness #C55242, the 30 amp maxi-fuses go in the Trailer Tow Electric Brake and Trailer Tow Battery Charge locations. These fuses are located under the hood in the…