Trailer Brake Controller Installation - 2004 Ford E-450 Video

I reached out to my contact at Draw-Tite who was able to give me the dimensions for the Trailer Hitch #41945. He said that the #41946 is for GM frames so it won't fit your Ford E-450 Chassis. From the rearmost hole to the end of the…

The distance is 13" from the center of the forward most bolt hole to the back of the cross section is 13". Please see the attached photo.

To install a brake controller in your 1993 Ford F-250, you will need to do some hard wiring. There will be four wires coming from the brake controller. The white wire is ground, the black wire is for 12V power, the blue wire is for the brake output…

Hayes does indeed offer a brake controller wiring adapter that's compatible with the 2008 Toyota Tacoma that's equipped with the factory 7-way trailer connector, part #HA81785-HBC. I've provided you a photo of what the connector that will…

Without having the tow package wiring like you mentioned, with the factory 4 pin, you will need to use the #ETBC7. The brake controller output wire needs to be run from the controller to the 7-way and the 12V from the battery needs to be run directly…

On a trailer 7-way the pin in the 1:00 position is the 12 volt power circuit and the pin in the 7:00 position is the ground. See attached picture.

Since you have a 4-way on your 2015 Ford F-150 what you need is the part #37185 to convert it to a 7-way and then you'll need to tap into the wiring at the rear of the truck frame for the 12 volt power circuit. I attached a picture that shows…

Brake controllers such as the P3 #90195 install to a harness located behind the center console. I have linked a video that should help. It is on an earlier model year cab and chassis but its in the same location. On the full size van models such as…

I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring…

The blue output wire to the trailer brakes on your 2000 Ford Van will need to be manually run from the brake controller back to the plug in the rear. The brake controller power supply and brake pedal wires are already run. Since your Van has a 4-Way…

The 2014 Fiat 500L Trekking, Easy, Pop, and Lounge can all be flat towed behind a motor home as long as they have a manual transmission and they can all use base plates #RM-522014-5. In addition to the base plates you will also need a compatible tow…

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…