Hayes Syncronizer Trailer Brake Controller Installation - 2021 Chevrolet Silverado 1500 Video

Without having the tow package wiring like you mentioned, with the factory 4 pin, you will need to use the #ETBC7. The brake controller output wire needs to be run from the controller to the 7-way and the 12V from the battery needs to be run…

To install a brake controller in your 1993 Ford F-250, you will need to do some hard wiring. There will be four wires coming from the brake controller. The white wire is ground, the black wire is for 12V power, the blue wire is for the brake output…

Hayes does indeed offer a brake controller wiring adapter that's compatible with the 2008 Toyota Tacoma that's equipped with the factory 7-way trailer connector, part #HA81785-HBC. I've provided you a photo of what the connector that will…

The only plug and play brake controller fit we have for a 2011 Dodge Dakota would be for if the truck had a factory 7-way. Since you only have a 4-way you would have to hardwire the controller in with the #ETBC7 kit which will convert the 4-way to a…

The red light of the Hayes Syncronizer Trailer Brake Controller part #HA81725 should only illuminate when the vehicle's brakes are depressed which activates the trailer brakes. If your not getting the red light when you depress the brake pedal it…

The #3064-P is the correct brake controller adapter for both the 2019 and 2020 versions of the Chevrolet Silverado and GMC Sierra 1500, so you've got the correct adapter to allow for a plug and play brake controller installation.

As a first step, you would need to select a brake controller. I would recommend the Tekonsha Prodigy P2, part #90885. The P2 is extremely reliable and easy to use, which makes it one of our all-time best selling brake controllers. Most of the Chevy…

I would be glad to help! When installing the Curt T-Connector #C56291 on your 2018 Honda Pilot, it looks like the location for the included fuse is the number 2 location in the fuse box that is located near the brake fluid reservoir (near the…

Brake magnet wires like what are on the brake assembly #23-106 that you referenced can be wired up with either wire getting the positive and the other getting the ground. As long as current runs through them it doesn't matter which wire gets the…

I reached out to my contact at AutoWBrake and he was able to confirm that the Autowbrake Electric Brake Controller #3430001 can be installed onto the rear of a vehicle like you mentioned. He mentioned that it was tested in that manner during…

If you are looking for a kit to allow you to install a 7-way on your 2017 Honda Pilot we have the T-One kit part #118286 which is a confirmed fit and would work well. The pre-wiring that this plugs into on your Pilot is present already at the rear of…

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…