Customers compare BWRVK3500 to these similar products
Products Featured in this Video
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…
view full answer...From what I could find on your Valeigh Beacon 34RLB 5th wheel it is 13'1" tall (13.08). The Lippert On-The-Go Telescopic Ladder #LC64HD you were looking at is only 12-1/2' tall, so it would not be tall enough to reach the top…
view full answer...There are camera kits that will have two cameras that can be viewed at different times on a single monitor but it gets complicated if you want one of the views to be on the trailer and the other on the tow vehicle. We have the Rear View Safety Backup…
view full answer...That's a good question as the 4.3" and 5" sizes are just referring to the screen and not the overall size of the monitor. So here are the overall dimensions for the monitors of each of the Furrion Vision S camera systems: - 4-3/4"…
view full answer...Yes, the B&W Companion hitches all use the same head so you can move it to a base that will fit the new Ram trucks with the factory prep package. The base you will need is #BWRVB3600. I have linked a video review of the base for you.
view full answer...The factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the four outer pucks and center gooseneck hitch ball are present but there are no actual holes in the truck…
view full answer...Since your 2014 Dodge Ram 3500 with an 8 foot bed does not have the factory underbed hitch prep package you will want the B and W Gooseneck Hitch part #BWGNRK1314. This hitch has a gross towing weight of 30,000 lbs and vertical load limit of 7,500…
view full answer...Yes the 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches part #BWGNXA4085 is an exact fit for the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1314. It will also give you that extra inch you're looking…
view full answer...The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…
view full answer...The B and W Turnoverball Gooseneck Hitch part #BWGNRK1314 that you referenced fits the dually and single rear wheel models of your 2018 Ram 3500.
view full answer...The Reese Revolution pin box has features like a Sidewinder and as explained in the attached helpful article, cannot be used with a sliding fifth wheel hitch. When executing turns it would have two moving pivot points and could cause damage to the…
view full answer...I spoke with my contact at B&W about the Companion Gooseneck-to-5th-Wheel Trailer Hitch, part #BWRVK3500. They told me that the base weighs 131 lbs, and the coupler weighs 73 lbs, for a combined weight of approximately 204 lbs. This hitch would…
view full answer...