Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e25GR Video

We do offer wheels and tire that are going to be larger in diameter than the tire size 4.80-8 you have on your trailer but how big you can go will depend on how much clearance you have. Your current size is 16.1 inches tall. To go to a radial tire…

In regards to the installation of a trailer axle like the Trailer Axle with Idler Hubs part #e25GR, you'd simply need to lift the trailer off the ground until the wheels are no longer touching then it's just a matter of removing the…

Hey Michael, the Kenda 5.30-12 Bias Trailer Tire #AM30710 has a K-65 mph sped rating.

The Kenda 8 inch Tire and Wheel, #AM30153, that you referenced can travel at max speed of 65 mph. This wheel and tire has a 4 on 4 inch bolt pattern and can carry its maximum load of 1,075 lbs at 100 psi. The tire has a bias construction and an 8 ply…

A 145/80-12 tire such as that on tire and wheel combo #AM35351DX will be about 1 inch wider and about 0.8 inches taller than your existing 4.80x12 tires. Provided that you have enough space all around the existing tires to go to the larger size then…

We have two options that are exactly what you are looking for with the part #AM30630 which is a Load Range C 4.80-12 on a galvanized wheel with a 4 lug bolt pattern or the part #AM30670 for a 5 lug wheel.

The benefits of installing larger tires are somewhat related to clearance in every way with the exception of the possiblility of additional capacity, having a radial tire option if you increase wheel size, and having broadened options of style. The…

Hey, thanks. You're not so bad yourself! Going to a larger tire size is possible but there are a few things to think about. Chief among these things is clearance. When going from an 8 inch tire to a 12 inch tire the diameter will increase by 4.4…

The largest wheel and tire combo we offer that has a 4 on 4 inch bolt pattern and a pilot diameter of 2.5 inch is the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel #AM3H410 which has an overall diameter of 20.6 inches.

To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel…

Based on the axle and bearing measurements it looks like your trailer was using a Dexter 22834 hub. The Outer Bearing #1779 has an ID of .938" and the Inner Bearing #2788 has an ID of 1.50". The outer bearing is slightly off but that may be…

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and can…