How to Install Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
Question:
Should I turn the trailer over to make it easier to install new axle?
asked by: Richard S
0
Expert Reply:
In regards to the installation of a trailer axle like the Trailer Axle with Idler Hubs part # e25GR, you'd simply need to lift the trailer off the ground until the wheels are no longer touching then it's just a matter of removing the u-bolts and sliding the axle out. I have attached an install video I did on this line for you below as well.
I don't recommend turning the trailer over for installation of the axle, I have never done this and I don't think it would be feasible for most trailers.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e25GR
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Search Results: utility trailer axles
- Search Results: dexter axle d60
- Search Results: 2000 lb complete trailer axles
- Video: Trailer Suspension and Axle Replacement FAQ
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: Replacement Axle, Hubs, Brakes, and Tires for Older Trailer With Dexter 22834 Hub
- Q&A: Removing and Replacing Trailer Spindles
- Q&A: Process for Changing a Damaged Spindle on a Trailer Axle
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Search Results: bed liner
- Shop: Shackle Bolt For Double Eye Springs - 9/16" Diameter - Plain - 3-1/4" Long
- Search Results: scissor jack
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Search Results: e29sr
- Search Results: 30" leaf spring
- Q&A: Recommended 56" Long Trailer Axle with 4-Lug Hubs
- Q&A: Trailer Idler Hub Assembly For a 1" Diameter Spindle That is 4-1/4" Long
- Q&A: Replacement Axle for Gheenoe Light Canoe Trailer
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Video: Timbren Axle-Less Trailer Suspension System Installation