etrailer Trailer Brakes AKEBRK-2L Review Video

Yes, the Trailer Hub part #AKHD-545-2-2K that you referenced is compatible with the brake assemblies #AKEBRK-2L and #AKEBRK-2R. The bolt pattern is the standard brake mounting 4 bolt pattern of 4 on 4 inch.

The hole diameters for the Demco Channel Tongue Trailer Coupler item #12564 are 1/2 inch. It is recommended to use grade 8 hardware to attach the coupler to your trailer frame. You can find these bolts at a local hardware store as they do not come…

Yes, the Demco Channel Tongue Trailer Coupler #12564 that you referenced does accept a 2-inch hitch ball and mounts to a 3-inch-wide trailer tongue. It's mounting hole spacing is indeed 3-inches and it offers a 10,000-lb weight capacity.…

I attached a picture of a 4-bolt mounting flange like what the brake assembly part #AKEBRK-2 you referenced is designed to attach to. This is a standard dimension so I would be shocked if the flange on yours was different.

The right and left orientation is determined if you are standing behind the trailer looking towards the tow vehicle. The left side is the drivers side and the right side is the passengers side. Tthe shorter brake pad will always be in the front of…

I can help you get the hub assemblies with bearings you need, but I need some information from you on your current bearings. You will need to pull one of your hubs and look at the bearing number on the face of the inner and the outer bearing of…

Easily the highest quality trailer breakaway battery with a charge and indicator is from Tekonsha, and is the following part number: - Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger #50-85-313 Tekonsha has a deserved…

The Bright Way Push-to-Test Trailer Breakaway Kit #3802346 was designed to attach to the outside of a trailer frame like you asked about so it would work well for you. It is weather proof so that it would do fine as long as you didn't…

The front cover of the Bright Way Push-to-Test Trailer Breakaway Kit #3802346 is supposed to swing out like you mentioned. I attached pictures that show the door open. I'd be willing to bet the hinge on the left side of the door isn't…

Yes, you can replace just the Battery #3801250 on your Bright Way Push-to-Test Trailer Breakaway Kit #3802346.

The Bright Way Trailer Brakeaway Kit #3802308 has a built in 1-AMP charger. So when your truck is connected it will be charging. There should be no draw going out while the trailer is disconnected so it should be ready to rip whenever you're…

Thanks for the picture! I have a solution for you but you aren't going to be able replace just the box on your trailer. You will want to use the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery item #3802346. This…