2" Coupler Latch Replacement Kit For a 2018 Jayco Jay Flight SLX Baja Travel Trailer

Question

Question:

I have a 2018 Jayco Jay Flight SLX Baja. Will this kit work on my coupler?

asked by: Phillip H

0

Expert Reply:

We do have the correct repair kit for your coupler as the Demco Coupler Repair Kit # DM5696 will only work on the leverlock 2" coupler or model DA66 brake actuator.

The Trigger Latch Repair Kit for A-Frame Couplers # CA-5100-RK is the correct replacement for the 2" coupler on your 2018 Jayco Jay Flight SLX Baja.

expert reply by: Bud M

0

Customer Image
(click to enlarge)

Answer 1

We can get you a ball mount with a longer shaft to help keep your trailer safe. Without knowing the rise or drop you need, or the weight capacity, I can only offer a couple of general recommendations for ball mounts with long shafts. Since you have a…

view full answer...

Answer 2

We don't have replacement parts for a GDC 100 actuator but we do have replacements for it that would work great like the #T4750820. This is a higher capacity disc brake actuator with an electric lock out.

view full answer...

Answer 3

There is not a repair kit for the thumb latch of the A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball #CA-5335-B. While I wish we had an option for you, if yours has busted you will need to replace the entire coupler.

view full answer...

Answer 4

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

view full answer...

Answer 5

The Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR at its maximum output will produce 60,000 BTU an hour. So at its highest setting if it ran constantly (which it won't, it only runs on demand.) It will consume 0.65…

view full answer...

Answer 6

There will be no trailer coupler latch repair kit for an Atwood Trailer Coupler 88555 which is discontinued. Unfortunately, the only option is a full replacement for which I recommend the Demco A-Frame Trailer Coupler part #DM14793-81. This coupler…

view full answer...

Answer 7

Atwood is no longer in business, and because repair kits and replacement parts are manufacturer specific, the best option available is going to be a replacement A-frame coupler. While I'm sure this isn't the news you wanted to hear, there are…

view full answer...

Answer 8

The Repair Kit for etrailer and Ram A-Frame Couplers part #CA-5100-RK could very well work with the Fulton a-frame trailer coupler on your 2003 Coleman Cheyenne Folding Pop-Up Camper as the design is relatively the same. However, we have not yet…

view full answer...

Answer 9

It doesn't look like we have an exact replacement coupler latch kit available for your trailer coupler. Your best option would be to replace your coupler with something like the #CA5100B which is also a A-frame coupler designed for a 2 inch ball…

view full answer...

Answer 10

The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS69NQ are designed to work with your 2021 Ford F-150 factory mirrors and will not obstruct your factory turn signals, puddle lamps, BSDS camera, or LED…

view full answer...

Answer 11

Based on my research the Shelby 5101 is an A-frame coupler with a 2" ball and 5,000 lb capacity. We have exactly that with the A-Frame Coupler #CA5100B, which has a trigger latch and has a black paint finish. The same coupler is available with a…

view full answer...

2" Coupler Latch Replacement Kit For a 2018 Jayco Jay Flight SLX Baja Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching