Review of Yakima Replacement SkyBox Barrel Nut - Y8870083 Video

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

The length of the Replacement Barrel Nut for the Yakima SkyBox Rooftop Box is 1-1/4 inches and the diameter is 7/16 of an inch. This barrel nut is designed as a replacement part for Yakima SkyBox Mounting Hardware. It fits a 1/4 inch - 20 size bolt.…

To install the Replacement Rubber Strap Kit for Yakima TimberLine Towers #8880820, on your TimberLine Towers, you will need to slide the barrel nut into the metal end of the strap, and bring the strap to the front of the tower. From here, you will…

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

I have the perfect cargo box in mind for your 2014 Honda CR-V, and here's why its dimensions are so important: You only have 46" from your front crossbar to your hatchback door, but your skis are 71" long and your bars are 24"…

Yes, the part #Y8870083 is the correct barrel nut for a Skybox 16 cargo box like yours.

Those are really good questions so I took a look at the owner's manual of a 2020 Kia Telluride and it does state that the towing capacity is 5,000 lbs (if the trailer has brakes) and the tongue weight capacity is 351 lbs (which is oddly…

I have a partial solution for you, but Yakima does not offer the longer barrel nut as an aftermarket replacement part. However, the small barrel nut is available as a replacement part though with the Replacement Barrel Nut for Yakima Cargo Boxes…

Yes, the T-bolt part #853208914 would fit into the top channel of a Thule Pro Bar.

I spoke with Yakima and they do not have the size of the bolt that holds the stem to the back plate on the Yakima SpareRide 2 Bike Rack part #Y02599. I would check to make sure the weld nut inside the back plate is not damaged as this could be…

The Replacement Barrel Nut for Yakima SkyBox Rooftop Box, part #Y8870083, is the same 8870083 barrel nut for the SkyBox. It measures 1-1/4" long, 7/16" wide, and has a thread pitch of 1/4"x20. This is the barrel nut that it sounds like…

I took some measurements of the Replacement Lid Support for Yakima Cargo Boxes #8880683 for you to compare with your Space Case Roof Box. From hole center to hole center when extended it measures 11 inches and when closed 3-3/8 inches. The overall…