Does Yakima Skybox Barrel Nut Y8870083 Fit Skybox 16

Question

Question:

Hello - I have a Yakima Skybox 16 purchased in 2016. I need one of the small replacement barrel nuts. Will your product Y8870083 work for my Skybox? I tried to search your site for the Skyboxes it says it fits in the description, but couldnt find them. I appreciate your help.

asked by: Katie H

0

Expert Reply:

Yes, the part # Y8870083 is the correct barrel nut for a Skybox 16 cargo box like yours.

expert reply by: Jameson C

0

Answer 1

The length of the Replacement Barrel Nut for the Yakima SkyBox Rooftop Box is 1-1/4 inches and the diameter is 7/16 of an inch. This barrel nut is designed as a replacement part for Yakima SkyBox Mounting Hardware. It fits a 1/4 inch - 20 size bolt.…

view full answer...

Answer 2

Those are really good questions so I took a look at the owner's manual of a 2020 Kia Telluride and it does state that the towing capacity is 5,000 lbs (if the trailer has brakes) and the tongue weight capacity is 351 lbs (which is oddly…

view full answer...

Answer 3

I have a partial solution for you, but Yakima does not offer the longer barrel nut as an aftermarket replacement part. However, the small barrel nut is available as a replacement part though with the Replacement Barrel Nut for Yakima Cargo Boxes…

view full answer...

Answer 4

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

view full answer...

Answer 5

I checked with Yakima and for the SkyBox 21 made from 2009 to present the lift struts are part #8880683 for the rear and #8880684 for the front.

view full answer...

Answer 6

You do in fact need part #Y8880348. This includes a new set of 2 handles and 2 lock cores with keys for your Yakima Skybox 21. If you're needing other replacement parts, they are: - Mounting Hardware, part #Y90135 - Cargo Box Cam Hardware, part…

view full answer...

Answer 7

I wish there was a trick to opening the Yakima SkyBox 21 Rooftop Cargo Box #Y07337 with the handles broken off, but there is nothing that is feasible; you can try using a Channel Lock but it doesn't seem likely you can do it without damaging the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Does Yakima Skybox Barrel Nut Y8870083 Fit Skybox 16

Product Page this Question was Asked From

Continue Researching