Lift Kit to Raise Suspension of 2018 Mesa Ridge 2910RL

Question

Question:

With box pin all the way up, the trailer is 8 inches higher at the truck box than the rear of the trailer. I feel I need to raise my Lippert trailer suspension 4 inches to level out the trailer so as to pull level. Can you help?

asked by: Dannie M

0

Expert Reply:

The tandem axle lift kit part # RR23QX that you referenced will raise your suspension height 2 inches but looking at your trailer it looks like the leaf springs are pretty flat and in need of replacing. That will give you some additional height as well since new ones won't be nearly as flat. If you can get me the axle capacity of your trailer as well as the length of your current springs I can help you pick that out as well.

expert reply by: Jameson C

0

Suspension.
(click to enlarge)

Answer 1

It does sound like you have found some clear damage to your 5th wheel trailer's leaf springs that will require attention. Uneven tire wear can be caused by a number of things - incorrect pressure, inadequate weight on the axle or a visibly…

view full answer...

Answer 2

The Timbren Trailer Suspension Enhancement System Medium-Duty Trailers #TTRA1032 that you referenced will give your trailer's suspension a noticeable amount of additional support. It will help level your trailer side to side as the…

view full answer...

Answer 3

The distance on center between the spring hanger bolt holes for dual axle setups, with the #APT9 Tandem-Axle Trailer Hanger Kit, should be 29-1/2 inches for double eye springs that measure 25-1/4 inches on center between the spring eyes and for axles…

view full answer...

Answer 4

I do not recommend using a leaf spring spacer (lift block) on your trailer. The reason for this is because they can cause the trailer to become extremely bouncy and rough which is just going to put more stress on your suspension and wear out the…

view full answer...

Answer 5

We have the Correct Track Lift Kit part #LC87120 that would work great for you. This is a single axle lift kit that would give you a lift of 2-1/4 inches.

view full answer...

Answer 6

When it comes to The 7-Leaf Double-Eye Spring for 4,000-pound Trailer Axles - 24-7/8 inch Long #DX74XR it is rated for a 4,000 pound axle. Each spring has a 2,000 pound capacity. So two springs per axle will give you a 4,000 pound capacity. The…

view full answer...

Answer 7

A 7,000 lb trailer spring can be used on a 6k rated axle but you should note that this will not give you more capacity. A trailer setup is only rated as high as it's weakest component. So while you may have 7k of spring rating with the #e64SR,…

view full answer...

Answer 8

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 9

I checked directly with Dexter, and from what I saw they have a measurement - taken from center of spring eye to center of spring eye - of 24.8", which is the same as our 24-7/8" measurement for the 7-Leaf Double-Eye Spring for 8,000-lb…

view full answer...

Answer 10

If your 2021 Grand Design Solitude 375RES is loaded when you're taking that measurement then yes, that would be why you're seeing a difference in the length from what you're measuring and what we have listed for the 7-Leaf Double-Eye…

view full answer...

Answer 11

I attached a picture that has all of the dimensions of the MORryde SRE3000 part #MR87ZR which would have much better ground clearance than what you have now.

view full answer...

Answer 12

You are correct that the 8000lb rating that the MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K #MR87ZR has is the maximum axle rating, and they would work perfectly with your 6000lb axles. Now to determine if these…

view full answer...

Lift Kit to Raise Suspension of 2018 Mesa Ridge 2910RL

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching