Review of Taylor Made Dock Accessories - Premium Dock Edging - 36945992 Video

For your Podium rack we do not offer a replacement bolt with tamperproof heads. I recommend the Thule One-Key System Lock Cylinders, part #TH450400. This set comes with 4 cylinder locks and keys that unlock all of the cylinders. Cylinder locks can be…

There is a small gap between the plastic cap and the outer edge of the lock core hole that is just large enough to allow you to insert a small, flat tool such as a flat head screw driver. Once you have the tool inserted, you will pry upward forcing…

I believe you are trying to install the lock core in the ratcheting arm of your Thule T2 bike rack, #TH9045. Is that correct? If so, there will be a small plastic insert in the lock core hole. To remove this piece, you can simply take a small tool…

For your crossbar towers, I recommend you use the Master Key in the Thule One-Key System Lock Cylinders - Qty 4 #TH450400 remove the locking plug. The plastic plug should be rotated to the unlock position and then pulled out. The new locking cores…

The Thule Hull-A-Port Kayak Carrier #TH834 will fit most aero-style roof racks so unless you have a roof rack on your 2017 Subaru Forester with taller bars like the Rhino-Rack Vortex bars (measuring 3-1/8" wide x 1-3/16" tall) then they…

I measured the Replacement Metal Bracket #853-5837 for you. The distance from the center of the slot to the center of the hole is 4-7/8 inches. The overall length of the bracket is 6-3/8 inches. I have included a picture showing these measurements…

The Bracket #853-5837, Base Pad #8535302, and Carriage Bolts #915-066-554 are correct as replacement parts for your older Hull-A-Port 835XTR model J-Style carrier. To replace the arm pad on your carrier you need the part #8533019. I'm not sure if…

At this time Thule does not offer a locking mechanism for the Hull-A-Port Kayak Carrier. The best recommendation I could make is to purchase a cable lock such as the etrailer Cable Lock, #e98891, and run it through the boat, kayak mounts, kayak, and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…