Hole Spacing and Length for Replacement Thule Hull-A-Port Metal Bracket # 853-5837

Question

Question:

What is the approximate spacing between the slot and the hole?

asked by: Joey F

1

Helpful Expert Reply:

I measured the Replacement Metal Bracket # 853-5837 for you. The distance from the center of the slot to the center of the hole is 4-7/8 inches. The overall length of the bracket is 6-3/8 inches. I have included a picture showing these measurements for you.

expert reply by: Michael H

1

click to enlarge

Answer 1

I'm a little surprised that the clamps on the #LR54FR won't tighten down on your 2023 Nissan Rogue crossbars but it is not unheard of with watersport carriers. The easiest way to fix the issue is to add in a thin piece of rubber. This will…

view full answer...

Answer 2

The Replacement Mounting Brackets and Hardware for Thule Pull Top Slide-Out Ski and Snowboard Carrier #TH753277902 will work if the holes are 4 inches apart on center.

view full answer...

Answer 3

I went and pulled a #THXADAPT9 from our warehouse to get the dimensions you asked for and the square holes are 1/4 inch by 1/4 inch and are 4 inches apart on center. This only includes one bracket.

view full answer...

Answer 4

The Replacement Mounting Brackets and Hardware for Thule Pull Top Slide-Out Ski and Snowboard Carrier #TH753277902 will work with the Replacement Top Mounting Clamp for Thule Ride-On Adapter #853-5267. Another option is the Replacement 13 mm…

view full answer...

Answer 5

We do have the correct replacement for a key with 082A. You need the Replacement Key for Thule Racks and Carriers #THKEYN082.

view full answer...

Answer 6

The highest capacity trailer tire we offer that fits a 14 inch trailer rim is the Load Range D part #TTWTRTM2157514D which has a capacity of 2,200-lb max load at 65 psi. With trailer tires you have to keep them inflated to their max psi at all times…

view full answer...

Answer 7

The Kenda Karrier ST205/75R14 Radial Tire #AM32161 with the 14" White Spoke Wheel - 5 on 4-1/2 tire combination is my recommendation for the heaviest rated 14 inch tire and wheel combination. The max load on this tire & wheel is 2,200 lbs…

view full answer...

Answer 8

I do have a couple possible solutions for raising your pontoon trailer, however increasing the shackle strap size will not be your best option. A more efficient way for raising the suspension on the trailer will be to use longer hangers. Unlike…

view full answer...

Answer 9

I believe you are trying to install the lock core in the ratcheting arm of your Thule T2 bike rack, #TH9045. Is that correct? If so, there will be a small plastic insert in the lock core hole. To remove this piece, you can simply take a small tool…

view full answer...

Answer 10

For your crossbar towers, I recommend you use the Master Key in the Thule One-Key System Lock Cylinders - Qty 4 #TH450400 remove the locking plug. The plastic plug should be rotated to the unlock position and then pulled out. The new locking cores…

view full answer...

Answer 11

There is a small gap between the plastic cap and the outer edge of the lock core hole that is just large enough to allow you to insert a small, flat tool such as a flat head screw driver. Once you have the tool inserted, you will pry upward forcing…

view full answer...

Answer 12

For your Podium rack we do not offer a replacement bolt with tamperproof heads. I recommend the Thule One-Key System Lock Cylinders, part #TH450400. This set comes with 4 cylinder locks and keys that unlock all of the cylinders. Cylinder locks can be…

view full answer...

Hole Spacing and Length for Replacement Thule Hull-A-Port Metal Bracket # 853-5837

Product Page this Question was Asked From

Continue Researching