Recommended Locks For Thule 460 Podium Rack

Question

Question:

Let me know which tamperproof bolt i need for my 460 podiun fixpoint rack. And how many I need. Thanks

asked by: P M

0

Expert Reply:

For your Podium rack we do not offer a replacement bolt with tamperproof heads. I recommend the Thule One-Key System Lock Cylinders, part # TH450400. This set comes with 4 cylinder locks and keys that unlock all of the cylinders. Cylinder locks can be a deterrent to theft when installed, providing more security, and giving you more peace of mind. I have linked you to a product review video for these locks.

expert reply by: Jeffrey L

0

Answer 1

For your crossbar towers, I recommend you use the Master Key in the Thule One-Key System Lock Cylinders - Qty 4 #TH450400 remove the locking plug. The plastic plug should be rotated to the unlock position and then pulled out. The new locking cores…

view full answer...

Answer 2

The integrated locks for your Kuat NV 2.0 Bike Rack like #NV22B will have the key number stamped both on the keys themselves and on the lock cores right above the key slot. The numbers on the keys are pretty small and hard to read but there should…

view full answer...

Answer 3

I do have an option for you but the photo you attached is a of a Thule Tracker FootBase which have since been discontinued. There are no longer parts available to use the Thule Tracker FootBase but you can still reuse the tracks you already have…

view full answer...

Answer 4

I believe you are trying to install the lock core in the ratcheting arm of your Thule T2 bike rack, #TH9045. Is that correct? If so, there will be a small plastic insert in the lock core hole. To remove this piece, you can simply take a small tool…

view full answer...

Answer 5

There is a small gap between the plastic cap and the outer edge of the lock core hole that is just large enough to allow you to insert a small, flat tool such as a flat head screw driver. Once you have the tool inserted, you will pry upward forcing…

view full answer...

Answer 6

I may have another option for you, but the original Thule 460 podium feet have been discontinued and we do not have any old stock left. Instead I recommend changing your crossbars and using the newer Thule Rapid Podium Feet #TH460R. Since you are…

view full answer...

Answer 7

At this time Thule does not offer a locking mechanism for the Hull-A-Port Kayak Carrier. The best recommendation I could make is to purchase a cable lock such as the etrailer Cable Lock, #e98891, and run it through the boat, kayak mounts, kayak, and…

view full answer...

Answer 8

The Thule Hull-A-Port Kayak Carrier #TH834 will fit most aero-style roof racks so unless you have a roof rack on your 2017 Subaru Forester with taller bars like the Rhino-Rack Vortex bars (measuring 3-1/8" wide x 1-3/16" tall) then they…

view full answer...

Answer 9

The Bracket #853-5837, Base Pad #8535302, and Carriage Bolts #915-066-554 are correct as replacement parts for your older Hull-A-Port 835XTR model J-Style carrier. To replace the arm pad on your carrier you need the part #8533019. I'm not sure if…

view full answer...

Answer 10

I measured the Replacement Metal Bracket #853-5837 for you. The distance from the center of the slot to the center of the hole is 4-7/8 inches. The overall length of the bracket is 6-3/8 inches. I have included a picture showing these measurements…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...