Roadmaster Anti-Sway Bars RM-590050-00 Review Video

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

Yes, the front #TFFF53B Timbren suspension enhancement are similar to the front #SSF-170-40-2 SumoSprings for your 2018 Thor ACE 30.2 Motorhome. Timbren is a little more well-known but we have received feedback from our customers that the SumoSprings…

The correct rear sway bar for your 2017 Jayco Alante 31 ft 18k GVWR on a Ford F-53 chassis is part #RM-1139-146. I called my contact at Roadmaster to confirm this. I have attached an install video on this sway bar for you as well.

The best way to adjust handling on your 2017 Ford F53 18K chassis is to start with anti-sway bars. I recommend starting in the back with the Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-146. Then I recommend the Roadmaster Front Anti-Sway…

To help reduce the body roll on your 2014 Forest River Georgetown motorhome on the Ford F-53 20,500lb chassis I recommend starting with the Roadmaster Rear Anti-Sway Bar #RM-1139-145. This will add a 2nd stronger rear sway bar to your Georgetown to…

Per the manufacturer The Extended U-Bolt Kit for Roadmaster Anti-Sway Bar #RM-590050-00 are tightened down evenly snug and then turn a 1/4 inch more. I attached a review video link below.

The Atwood #AT3308046006 cover that you selected will likely work just fine. I contacted the manufacturer and they did not have your model 600315.321 so I can't spec out the exact one. There may be another sticker on your unit ending in .331 or…

For the Ford F-53 chassis you would use Roadmaster anti-sway bar #RM-1139-145. If your motorhome is more than 33 feet long then you can use #1139-144. The bar diameter on it is 1-3/4 inches as opposed to the factory 1-1/2 inch sway bar.

For your 2019 Tiffin Open Road 34PA built on a 26k GVWR Ford F-53 chassis the correct rear sway bar is the part #RM-1139-149. I also attached an install video link for this for you to check out as well. If you ever decide to replace the front bar…

On your 2017 Fleetwood Bounder, the Roadmaster Rear Anti-Sway Bar for Motor Homes, #RM-1139-143 is not a confirmed fit. You would want to instead use #RM-1139-149 I reached out to my contact at Roadmaster for you and their suggested installation time…

To determine whether or not a longer U-Bolt kit is needed when you install the Roadmaster Rear Anti-Sway Bar #RM-1139-146 on your 2015 Winnebago Vista 27N Motorhome you need to look at your current U-Bolts and take a measurement. The bracket that…