Reese Weight Distribution RP26003 Review Video

In this senario, I would run a wire from the center pin of the 7-way to the reverse light circuit on your truck. This will enable you to bypass the fuse. Because of this direct connection you should be able to back up without your trailer brakes…

Yes, the center pin for the 7-way trailer connector on your 2018 Ford F-150 is for the reverse light circuit. If the vehicle is placed into reverse then the pin will become active and send power to the trailer. I have attached a selection of our…

Friction-style sway control mechanisms like #RP26005 and the items shown on the linked page DO NOT allow you to back up a trailer while the friction bar is engaged. It must be disconnected or at least have the tension released. Otherwise the…

An ST205/75R15 tire size like you have now will have a section width of 8.1 inches and overall diameter of 27.3 inches. An ST225/75R15, #AM10256, will have a section width of 8.9 inches and overall diameter of 28.4 inches. So the larger size is 0.8…

The Phoenix Electric Trailer Jack with Remote #UF38-944055 has a multiple mount hole pattern. This pattern allows you to position the jack so the motor faces the front of the A-Frame, or it can be rotated so that the motor faces the drivers side of…

Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt…

The Aluminum Bobcat Trailer Wheel #LHSJ211G appears to be the closest wheel we have to your JFW wheel. Doing an online search, the only wheels like this I could find were used, and I was not able to find the JFW company with that sticker.

We don't have a wider bracket than the #RP26005 for your ball mount so the best option we would have would be a new ball mount that has the bracket already attached like the Curt #D320 which has a drop of 2 inches since you aren't wanting to…

Best option we have is the part #e98887 for a pin lock for the Demco coupler part #DM15000-52. This has a pin diameter of 1/4 inch and a length of 2-1/2 inches so it will fit tight to your coupler and fit well still.

There unfortunately isn't a guide to tell us the size needed for your specific trailer, but it's really easy to measure for the correct size lug nuts. You'll want to use a set of calipers #PTW80157 to measure the diameter of the wheel…

There sure is! The correct locking pins for the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4" Drop - 6,000 lbs #C45901 is the Curt Lock Set #C23556. This set includes one lock to lock the ball mount section to the channel,…

The 3 inch channel with 1 inch holes is fairly standard. The Curt Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs #C45900 fits those descriptions. The Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for…