Phoenix USA Tires and Wheels QT545C Review Video

There is a great option for a hub cover that will work with the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 but one does not come included with this combo. I recommend using the Phoenix USA QuickTrim Hub…

Yes, the Phoenix USA QuickTrim Hub Cover part #PXQT545BHS will fit the acorn style (closed end) 1.38" tall lug nuts on your trailer. They are actually designed specifically for this type of lug nut but work with most open end versions as…

Overpacking the trailer hub with grease is the number one reason for grease seal failure. For a boat trailer I would recommend re-packing the hubs by hand with grease once per season and you'd be fine. I don't like recommending people…

It does sound like a possible overload situation. It is also possible that if you went up on a curb or something similar hard enough while loaded it could have caused the same problem. You will want to inspect the trailer suspension. You will be…

You will have to look at the original light to determine the manufacturer and model number. If it is listed on the light it will be on the light housing somewhere (not the lens). If it is not, then you have to go by the measurements of the light.…

The Aluminum Hi-Spec Series 03 Mod Trailer Wheel #AM22627 that you referenced actually does take a lug nut with a 60 degree cone like the majority of the wheels on our site. Since the wheel bolt size that fits this wheel is 1/2" - 20 I recommend…

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22627 that you referenced has a zero offset and a backspacing of 3-1/2 inches.

What you have is a 5 on 4-1/2 inch bolt pattern and it sounds like it's a mini mod wheel with the holes you mentioned. If it is aluminum we have a wheel with a 3.19 inch pilot hole. That's just a hair over 3-1/8 inches. It's part…

You will have to verify the correct wheel width required for your tires as we have the Dexstar 15" x 5" #AM20422 and 15" x 6" #AM20522. Both these are our most price conscious wheels and have the 5 on 4-1/2" bolt pattern you…

Friction-style sway control mechanisms like #RP26005 and the items shown on the linked page DO NOT allow you to back up a trailer while the friction bar is engaged. It must be disconnected or at least have the tension released. Otherwise the…

Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt…

We don't have a wider bracket than the #RP26005 for your ball mount so the best option we would have would be a new ball mount that has the bracket already attached like the Curt #D320 which has a drop of 2 inches since you aren't wanting to…