Optronics Trailer Lights - Tail Lights - STL14RB Review Video

The part #STL14RB is for the passenger side and the driver side matching light is the part #STL15RB which has the license plate light.

I had a hard time finding a lot of information using the two part numbers you found both on the lens and the light base. It looks like the base number may refer to the Optronics Trailer Light #MC32AB, for which the correct replacement lens is part…

I believe I have a solution for you. What you can do is use the LaSalle Bristol Toilet Floor Flange w/ Spigot for RV #3446336347 with the Valterra DWV Adapter for RV Sewer System - ABS Plastic #D50-2929. The #3446336347 is 1-1/2" tall but when…

In order to help prevent leaking between the grommet and tank on the Replacement Rubber Grommet for RV Black Water Tanks part #F02-2106 it would be wise to use a sealant like part #LT37467 between the two surfaces. I am not sure if this is a…

Based on the number you mentioned and other customers who have mentioned it the replacement side lens SHOULD be the part #AL17RB. I say should because the SAE number isn't a part number which means it's not always reliable to pick out…

The standard size of a water drain valve for grey tanks on most RV's is 1-1/2". For this 1-1/2" drain valve, I have three options for you to consider. The first option is the Valterra Waste Valve for RV Gray Water Tank part #T1001PBC.…

The LED Combination Trailer Tail Light part #STL14RB would be a suitable replacement for the passenger side tail light on a 2019 Bass Tracker Trail Star Trailer. If ever needed, we also have part #STL15RB for the driver side.

For the drivers side light to go along with the part #STL14RB that you referenced you would want the part #STL15RB. This is the matching light you are looking for.

I've linked a help article that will give you the common color coding but on your trailer I wouldn't go by it. Even if they are correct you just never know so I suggest testing it. To test it cut off the 5-way connector that's on there…

In order to install a 7-way trailer connector like the 7-Way Molded Trailer Wire Connector part #H20043 on a trailer with five wires, we need to know what those wires do. I can almost guarantee what four of them are; left stop/turn, right stop/turn,…

Thanks for all the numbers and information. Since your trailer uses #LM48548 inner bearing we do not have a replacement hub and drum kit because of the spindle it uses. The #LM48548 bearing is only used on some agricultural hubs. So that leaves a few…

The Dexstar wheels are still in use by a lot of folks and as you already identified, available for purchase here at etrailer.com too under #AM20208. As for advantage or disadvantage to swapping out the hub it is in large part a matter of aesthetics.…