Review of Optronics Trailer Lights - Red Tail Light - STL73RB Video

Axles that are 3,500 lbs are all 2-3/8 inches in diameter, and that is the diameter of the 3,500 lb Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs #35545I-ST-89.

The Thule HideAway Awning part #TH490011 offers direct mount installation. Therefore, you'd need to attach the brackets directly to the wall of the trailer. If you have existing brackets, these would need to be removed. I have attached for you…

You could install the Rack'em Fitz-All Enclosed Trailer Ladder Rack Item #RA-28 on your trailer and mount the Thule HideAway Awning - Wall Mount - Waterproof - 80 sqft Item #TH490011 to it. Attaching it to the rack will allow you to place it…

There may be a bunch of different reason why your Lippert Level-Up system has suddenly stopped working. The most common reasons are due to a dead battery, extending your jacks too far, or a blown fuse. The first thing you should check for is the easy…

What you have there are the Command 003-20 incandescent tail lights. Although we do not have the incandescent replacement, we do have the LED version which is the #CE86FR. You will want to keep the lights the same way they are now with the brake…

I recommend the Optronics LED trailer light kit #TL16RK. The kit includes 2 LED tail lights, 2 amber side marker and clearance lights, license plate bracket, wiring harness and stainless steel mounting hardware. I also recommend getting a deluxe…

We do indeed have an install video showing the Curt #C56040 trailer wiring harness being installed on a 2014 Subaru Forester. The linked instructions show the location of the connector that the wiring harness plugs into. Once you locate the…

It sounds like your trailer has the 6-1/2 inch Oval stop turn and tail lamps and some side marker lamps that use a rubber grommet like the 6-1/2 inch oval tail lights grommet, #A70GB. Since the area where your lights are mounted is not accessible…

The marker and clearance lights you have now ground with a single wire hence why you have two wires total, one for power and one for ground. If the marker or clearance light only has one wire then this wire is for power and the light grounds though…

The closest replacement taillight that we have to the light that you have is the Fusion LED Trailer Tail Light #STL211XRFHB. This tail light has the back-up light feature that yours also has. The difference is in the dimensions. The size of this…

The easiest way to cut the oval hole for the Rubber Grommet, #a70gb, in my opinion, would be to use a Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, BK70BB, as a template and then use a hole saw the correct size to cut a hole on each end…

Looking at images for a 2017 Skeeter boat trailer it appears they use the Mini Clearance/Side Marker Light #TN96MR on the rear of the trailer to fit into a 3/4" hole. And the Thinline LED Clearance and Side Marker Light #AL91AB just in front of…