Optronics Trailer Lights - Clearance Lights - MCL63AB Review Video

Lippert does not recommend using ATF Type F Fluid as it is not compatible with Lippert hydraulic system #LC251910 seals because they will not work properly. The following automatic transmission fluid (ATF) recommendations for use in Lippert…

I did some research on your cap LED light strips on your 2019 Grand Design Momentum 351M toy hauler. We do carry LED strips that are compatible. - Optronics Flexible LED Light Strip - Weatherproof - White #UCL90CB Also, if you need to connect two…

There are five mounting brackets available that fit the Optronics Trailer Clearance Side Marker Light #MC65AB. These three are all black plastic. They are Optronics #A65PBPG, #A65PB and #A65B. The first two come with a single wire, the…

Yes, the Chrome Bracket and Single Wire Plug #A67CB that you referenced is the correct base for the #MCL63AB and #MCL63RB that you plan on getting. The reason this bracket uses a single wire is because the light will ground through the mounting…

We don't have specific fit information for the clearance lights of trailer manufacturers. We do carry virtually every trailer clearance light though, so the best recommendation I can make is to check out the link I attached to the right that has…

What you have is a 5-way with a double wishbone, which means it is likely a double wire for marker lights as well as a double ground. You can replace your 5-way with another wishbone-style but it does not need to be a double wishbone with 7 wires,…

The only bushings we have that are 9/16" Inner Diameter, 3/4" Outer Diameter, and 1-3/4" Long are Nylon Bushings item #SP05-060. The bronze bushings from the MoRyde Suspension upgrade kit Item #MR46ZR would not fit in the TruRyde…

For sealant we have the TremPro 644 Silicone Sealant #0160297 which adheres to rubber-like roofing materials, aluminum, galvanized metal, plastic, vinyl, fiberglass, wood, and even mortar and concrete. If you are meaning that you need to redo the…

The TremPro 644 Silicone Sealant part #0160297 is what we use for general roof repair and it will work great for you as well as it works on both aluminum and galvanized metal.

Yes, the Replacement Fan Motor Assembly Kit #FVK8017-00 is the correct motor replacement for your Fan-Tastic 4000BT roof vent.

It doesn't look like we currently offer the correct lens replacements based on the dimensions you provided and the tail light you have looks like the base would be too broken and would allow water in to replace just the lens so you're looking…

I looked up your TruckLite Model 19 and the Sealed, Thin Line LED Trailer Clearance, Side Marker Light #MCL75RB is a match for what you have and would be exactly what you would need. For amber you'd need the part #MCL75AB.