Recommended Replacement Lights For A 2014 Gulf Breeze Ultra Lite 22 TRB With Hail Damage

Question

Question:

I had hail damage 2014 Gulf Breeze Ultra Lite 22 TRB Tail stop Light 8.5 by 4 x2 units left and right side only need lens 2 red side marker/clearance light 3.75 X 1.75 inches and 1 amber above I only need lens 1 side outside porch light white 8 x 6 1 black plastic cover the goes over the furnace heater on top 1 skylight on top over the shower stall I have pictures of the above if that will help.

asked by: Stanley B

1

Helpful Expert Reply:

It doesn't look like we currently offer the correct lens replacements based on the dimensions you provided and the tail light you have looks like the base would be too broken and would allow water in to replace just the lens so you're looking at a complete replacement for these lights.

For the tail lights I recommend the Low Profile LED RV Tail Light w/ License Bracket - Driver's Side # RVSTLB61 and Passenger's Side # RVSTLB60.

The clearance lights can be replaced with the Optronics LED Trailer Clearance or Side Marker Light w/ Reflector # MCL44RB1 for red and part # MCL44AB for the amber lights.

The closest option we have for the porch light would be the LED Porch and Utility Light for RVs # DG52723VP.

Each of these lights are a surface mount design so it would be a real simple swap out.

We don't currently offer skylights or the roof vent cover that you're needing so you'd want to reach out to a local RV dealer so see if they have replacements available.

expert reply by: Kevin C

1

Tail Light
(click to enlarge)

Clearance Light
(click to enlarge)

Porch Light
(click to enlarge)

Answer 1

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 2

Yes, for 5,200 standard trailer axles we have the hub part #8-219-4UC3-EZ which is a fit for 5,200 lb axles and has the bolt pattern of 8 on 6-1/2 inches like you said you need.

view full answer...

Answer 3

There is a standard vent size opening which is 14" wide x 14" long but not all of them follow this rule so you will need to measure to be sure. The Camco RV and Enclosed Trailer Roof Vent Cover part #CAM40453 fits the standard 14" wide…

view full answer...

Answer 4

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 5

It's really going to boil down to what size you're looking for and what color you'd like the light to be, but you can't go wrong with a simple rectangle light like the LED Porch and Utility Light for RVs #DG52724VP. This light is…

view full answer...

Answer 6

Stander pin size for 5th wheel trailer hitches that install in the industry standard above the bed rails, such as those included with Husky kit #HT31404-686, are 1/2 inch in diameter and 3-1/4 inches long like #6014. A longer pin could be used but…

view full answer...

Answer 7

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Recommended Replacement Lights For A 2014 Gulf Breeze Ultra Lite 22 TRB With Hail Damage

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching