Master Lock Trailer Coupler Locks - Latch Lock - 605DAT Review Video

We have the MasterLock Trigger Style Coupler Lock part #605DAT which has a span of 3/4 inches like you said you need that would work well. You are correct and the tighter the latch opening is to the trigger latch of the coupler the harder it would…

We have a really great solution for a lock for the latch of the Demco Coupler part #DM12925 that you referenced with the Bulldog Lifelong Trailer Coupler Lock #BD580403 that fits tight to the coupler trigger making it very hard to get into. The…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

When you mention locking collar, I am led to believe that you might be describing a hammer blow-type coupler, like our part #BD028288. This type of coupler has a collar that would slide up, securing the jaws of the coupler in place over the trailer…

The InfiniteRule #34061071-D hitch lock isn't available keyed alike, but we do offer a stainless steel locking hitch pin with the same 2-5/8 inch inside span dimension that is. I'd recommend the etrailer brand #e98882. On the linked product…

The Yakima Rack and Roll Trailer Kickstand, part #Y08115 is designed to fit 2x2 inch tubing. Keep in mind that the trailer that this item is designed for has 200 lb capacity, so it is not designed for heavy duty use.

We sure can, but the Master Lock #605DAT lock you'd looked at isn't available keyed alike. We do have options for keyed alike coupler locks, however. I'd recommend a latch lock such as the etrailer brand #e98890 for a 7/8 inch span or…

The shackle diameter of the Bolt lock part #BLT59FR is 5/16 inch. The #605DAT has a 1/4 inch diameter though.

For your 2.5 inch wide and 2 inch high trailer tongue, the Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,500 lbs #MJ-1500B is my recommendation. It will work very well with the trailer tongue you have and will…

I went out into our warehouse and grabbed a Replacement Axle Bolt Kit for Yakima Rack and Roll Trailers #Y8880180 to measure the dimensions of the head of the bolt and the nut. You would need to use a 7/8 inch wrench or socket on either end.

I have included a link to the installation instructions for the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 below that will give you the correct torque specification. Be sure to follow the specifications listed in step 2 to ensure the…

Hitch balls are available with shank lengths that are short (less than 2 inches), medium (between 2 and 3 inches) and long (greater than 3 inches). The drawbar thickness determines what shank length is needed. At least one thread needs to be visible…