Review of Malone Watersport Carriers - Replacement Balloon Tires - MPG516 Video

I'm a little surprised that the clamps on the #LR54FR won't tighten down on your 2023 Nissan Rogue crossbars but it is not unheard of with watersport carriers. The easiest way to fix the issue is to add in a thin piece of rubber. This will…

The Balloon Beach Wheels for Malone Clipper/Xpress Kayak Cart part #MPG516 for the Malone Clipper part #MPG502 and Xpress Kayak Carts part #MPG504 will fit other model carts if the wheel fits the axles. The wheel is designed for a 2.75" long…

I spoke with LockRack and they said the bolt for the Universal Crossbar Adapter for Lockrack Watersport Carrier #LR53FR measures 1-3/8" long and takes a 3/16 or 5 mm hex key.

The Malone Traverse Kayak Cart with Flat-Free Tires #MAL29AR is an excellent product to transport your kayak along solid ground like gravel or grass. You can definitely swap out the tires to the Balloon Tire Beach Wheels #MPG516 for that softer…

We checked with Malone and they told us that the pilot diameter for the Replacement Balloon Beach Wheels #MPG516 that you referenced is 20.5 mm.

The 12" Balloon Tire Beach Wheels for Malone Clipper or Xpress Kayak Cart #MPG516 do not include any shims or parts for mounting to the Cart. You will need to reuse or source the appropriate shims if you have lost them.

I spoke with my rep at Malone and was told that the pilot diameter for the Replacement Balloon Beach Wheels item #MPG516 that you referenced is 20.5 mm. Depending on which model of cart you have will determine if these wheels will fit. I have…

I spoke with my contact at Dexter regarding the Nev-R-Lube Bearing #31-71-3 that you will be replacing. He stated that you will just need a 1-1/2 inch socket for the 1.42-1.44 inch nut. This is the same size socket needed for a standard spindle nut.

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

You can try fitting the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255 sideways but it wasn't designed to be installed that way so I recommend installing it the correct way and routing your wiring to it that way. This will fit A-Frames that…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…