Review of Yakima Replacement T-Bolts With Nut For Rack And Roll Trailer - Y8880184 Video

The Yakima JetStream crossbars have a T-slot that is 1 inch wide and 1/2 inch tall so any t-bolt used would have to fit within those measurements. The 4-bolt set of M10 x 1.5 x 25 bolts #Y8880184 will work since the head is 3/4 inches square but I…

Yes the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 that you referenced would fit the top of the HD bars or the Overhaul HD rack.

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

The Replacement Mounting Hardware for Recovery Tracks for Yakima Ladder Racks part #Y83FR uses M8 hardware per Yakima.

The T-slot channel dimensions for the Yakima HD Crossbars #Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as…

The Replacement T-Bolts for Yakima Universal Mount Crossbar Clamp - Qty 2 #8860061 are 3" and are designed for the ReelDeal and ShowBoat 66 carriers. These were the bolts you referred to.

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

I measured the widths of the c-channel on the Rhino Rack Vortex Aero Crossbars and the bottom width is 7/8 inches and the neck width is 7/16 inches. I have attached a photo showing these measurements for you to check out. As long as the t-bolts on…

I was able to go to our test fit bays and use a digital dial caliper to measure the top channel on the Rhino Rack Vortex Aero Crossbars #RRVA126B-2, that with the SX Series Legs #RRSX100 are confirmed to fit your 2015 Toyota Sienna with factory…

There is a T-bolt that is threaded with a nut that will fit the Malone AirFlow2 #MPG215 roof rack; it is from Yakima and is the following part number: - Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 These are 1 inch tall…

Yes the Yakima BigCatch Kayak Carrier w/ Tie-Downs part #Y04091 will work on your Yakima Rack and Roll Trailer. To prevent them from moving they are easy to tighten down and get really secure. With that said there is the potential for them to…

In order to secure a kayak to the Yakima Rack and Roll Trailer part #Y08107 you'll need some sort of carrier to help hold it in place, I recommend the Lockrack Adjustable XL Watersport Carrier part #LR54FR since it has locks for security and…