What is the Overall Length of the Bolts in the MORryde Wet Bolt Kit with 2-1/4 Inch Shackles  

Yes, the MORryde Suspension Upgrade Kit #MR46ZR can certainly be used with the Lippert Road Armor Equalizers. You will just want to be sure that the stock shackle links on your 2021 Cougar 29RKS are 2-1/4" long when measured center hole to…

Yes, the MORryde ALLTREK 4000 part #MR89DR is correct based on your dimensions. The ALLTREK provides best cushioning vertically and horizontally so it would be your best overall option. It would perform better than the CRE3000. You'd want to…

The best way to find the correct replacement for your equalizer is by measuring the distance from the front shackle hole to rear shackle hole on your current equalizer. The 33" AllTrek #MR89DR has the holes spaced 6-1/2" on center…

There unfortunately isn't a guide to tell us the equalizer, shackle straps, and leaf spring sizing for your 2016 Grand Design Reflection 313RLTS so you'll need to a bit a of measuring to determine the best replacements. Before…

Since your shackle straps are 2-1/4 inch for a wet bolt and heavy duty shackle kit you'd want the #MR46ZR which comes with bushings as well. You do not need new equalizers.

Yes. Since you know your 2019 Forest River Wolf Pack 325/13 uses an equalizer that is 5-3/4" long you'll be able to use the MORryde Rubber Equalizers #MR87ZR for an upgrade. It's a good idea to go ahead and upgrade your…

Trailer leaf spring suspension needs to have some ability to move otherwise it won't work. This is why when you install kits like the #MR58ZR there will be some play to allow the suspension to function and move.

The height of the Equa-Flex Cushioned Equalizers part #LC314336 is 3-1/4" which you can see in the photo below. If you only have 2" of height with the existing equalizers then this may raise the trailer slightly but not a direct 1:1 ratio…

Since your Lippert axle is rated for 4,400 pounds normally you would use Equa-Flex system #LC279687 which was designed for 3K to 6K rated axles like yours. But if your existing equalizers are close to 14-5/8 inches long from eye center to eye center…

I reached out to the manufacturer and the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3-5/16" Long #126B2 is a pressed in zerk fitting, so it cannot be replaced. This is also true for Dexter bolts as well. There are…

Yes, we do have the wet equalizer bolts you can use with the Equa-Flex Cushioned Equalizers. You will need #126B2. I have included a picture showing a typical installation of the bolts being used to secure the springs to an equalizer. Installation of…

Yes, the Equa-Flex Cushioned Equalizers part #LC314336 will work with the MORryde Wet Bolt Kit LRE12-001. I took a look at the MORryde Wet Bolt Kit and was able to confirm that it uses 9/16" x 3-1/2" bolts which is what you need for the…