Review of Lippert RV Slide Out Parts - Replacement Sensing Control Panel Power Gear - LC27WJ Video

For the module you'll want the Replacement Sensing Control Panel for Power Gear Single Rail Above Floor Sofa Slide-Out #LC27WJ and for the harness you'll need the Replacement Wiring Harness for Lippert Power Gear Slide-Out…

The male plug and wires for the Lippert Components Controller 2.070 x 1.5 - PART 10665 #LC135666 is the wiring harness #LC135696. I reached out to my contact at Lippert to confirm this is the part you need.

Yes, the Lippert Slide-Out Switch Assembly #LC117461 is going to work with the Lippert Controller 2.070 x 1.5 - PART 10665 #LC135666. The wiring harness #LC135696 that connects to the controller is going to have a green and a yellow wire for the in…

Sure thing! The correct replacement motor for your 2003 Fleetwood Southwind 32V is the: -Replacement Gear Motor Assembly for Lippert Electric Slide-Out #LC386327.

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

This is a pretty common issue as the 12 volt accessory/charge circuit is not always active on vehicles with OEM 7-ways. The solution is to run 10 gauge wire like part #10-1-1 (sold by the foot) through a breaker like part #9510 between the 1:00 pin…

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.