bing tracking image
Q & A Icon

Troubleshooting Slide Out Switch To Controller Wiring Issues  

Question:

Does the LC 10665 slide control work with the LC 117461 switch? I have installed this combo and the slide will only go out and not return. Wiring per info from your website. Thanks,

1

Helpful Expert Reply:

Yes, the Lippert Slide-Out Switch Assembly # LC117461 is going to work with the Lippert Controller 2.070 x 1.5 - PART 10665 # LC135666. The wiring harness # LC135696 that connects to the controller is going to have a green and a yellow wire for the in and out functions of the slide out switch.

The yellow wire both this harness and the switch wiring harness is for the out function and the greens are for the in function. I recommend first checking that these wires are spliced together correctly and that they are receiving 12v power and are properly grounded using a multimeter like # PT29ZR.

If you are still having issues after checking all the wiring then the issue could be a defective motor instead. If this is the case then try to get a picture of the tag on the motor so that we can use the numbers on it to determine the correct replacement.

could be a motor issue

expert reply by:
1
Kevin C
117461 Blueprint
117461 Blueprint
(click to enlarge)

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>