Single Slide-Out Switch - On/Off - Black

Video Transcript for Review of JR Products RV Exterior Parts - Slide-Out Switch - 37212285

Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products, single slide-out switch.So this is going to replace our worn out or damaged slide-out switch, so we can get that rolling again. It's just going to be a rocker-style switch, and this is going to be a momentary switch. So whenever we press and hold, that's going to operate our slide out. So if we want it to move back in, press and hold the top. If you Want to move it out, press and hold.

Whenever you release that button, it will turn off. So if you get to where you need it to go, then you just lift your finger off of there, and it'll stop that operation.It does have the little outer cover that comes with it. If you pull that off, you can see the attachment points to get that in place. So we'll have these two holes up here. It doesn't come with any hardware to attach this, so you will pick up some on your own.

And then at the back, we'll have our spade attachments there to get everything connected up.So this is going to work with 12V 40-amp continuous power, and it's just going to replace one of your switches there. Now, as far as the size of the cutout at the back, it's about 1 7/8 inches long by about 1 1/8 inch wide. The overall size of this with our cover in place, I'm just going to pop that back on there, from top to bottom, it's about 2 7/8. And then at the widest point of our switch, it's about 2 inches or 1 7/8. The total depth is about an inch and a half.

The portion that's going to actually stick out from our mounting surface is about a half inch to the top of that rocker switch.That's going to do it for our look at the JR Products single slide-out switch..