Review of JR Products RV Door Parts - Entry Door - 372-2200-90 Video

We have gas shocks for trailer doors, and I can tell you how to determine the correct one for your trailer, but wouldn't have any way of knowing the exact one you need. To determine the correct one though, all you have to do is measure you…

For a 20 inch long gas shock with 100 lb lift force we have the part #372-2300-100 which would work great.

Since you mentioned 80 lb shocks being inadequate, I'll go ahead and give you gas shocks with at least 100 lbs of force that are 20 inches long. I don't have any way of knowing what mounting hardware you have, but I can tell you each of these…

JR Products, like the Gas Shock #372-2300-150 you mentioned, are manufactured 100% in the United States.

The highest rated gas shock absorber we offer is the JR Products Gas Shock part #372-2300-150 which measures 20" extended and 1.41" compressed or part #372-7145 which measures 26.32" extended and 15.82" compressed. These shocks…

Typically the existing shock is a good way to determine what is needed for replacement; the weight of the door being held, the length of the shock and the angle they're installed at all have effect on the force required to close the door. In most…

There are many factors that go into selecting the correct gas shock, the easiest would be to simply match the new shock with the existing using any labels printed on the body. If none are present or you are adding a new one then you can use a formula…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For you 2024 GMC Sierra 2500 AT4 that has a 3 inch lift I would go with the Roadmaster sway bar part #RM25FR as it's slightly thicker than the Hellwig that also fits your truck which will be helpful since lifted vehicles have a higher center of…

Hellwig lists the Hellwig Rear Anti-Sway Bar #HE36MR as the correct fit for a 1998 Chevy K2500. As for fitment with the staggered shocks, you shouldn't have any issues and can even see this setup in the attached installation picture below. The…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

No, they do not but I have a set that does. They are the Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #RP30035. These are confirmed to fit the 2002 Ram 2500 with the 6-1/2' and 8' bed lengths. I have…