JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 10.41" compressed, 17" extended, and has 90 lbs of force.
Features:
Specs:
When replacing gas shock on your vehicle or RV, you will want to make sure you are buying a replacement with the exact same extended length, compressed length, and pounds of force. This information is usually printed on the shock. Lengths are measured from the center of the ball joint used for mounting. If you are planning on installing gas shocks on something for the first time, identifying the shock you need requires fairly complex initial calculations, so be sure to do your research to avoid purchasing a shock that will not fit your application.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this JR Products 17 inch long gas shock. Now this is a quick and easy replacement for any worn or broken gas shock that you might have. This'll replace a gas shock on multiple applications like on your RV, trailer doors, storage compartment doors, truck bed covers, or even fold-down camper beds. This is designed with the high quality black nitride shaft.
Includes the plastic ends with the locking clips to secure it to your mounting ball. And the connection type on this is a 10 millimeter ball socket. Does install easily in minutes, no special tools required. All you have to do is have a small flat-tipped screwdriver, just pry up the clip on each end, and you just wanna pry it up. You don't have to remove it.
Just pry it up enough to release the pressure. And then put this over the ball, push that clip down, and it'll secure it into place. Now when you do install this, you do want this inner rod right here facing down, and it's also recommended to replace these gas shocks in pairs. Now the length on this, which is measured from the center of this ball socket to the center of this one, is gonna be right at 17 inches. The compressed length is 10.4 inches, and the output force on this shock is 90 pounds.
But that should do it for the review on this JR Products 17 inch long gas shock..
Average Customer Rating: 4.7 out of 5 stars (320 Customer Reviews)
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 10.41" compressed, 17" extended, and has 90 lbs of force.Just received and put on today. The gas shocks vey easy to replace. Doors on rv are open and staying open by the shocks. When the other door shock need replacement. I will be buying same product.
These shocks made my RV cabinet door stay up like new again!
Part was exactly what I was hoping to be. I’m satisfied with my purchase. Part was delivered in a timely manner.
Exactly what I was looking for. A perfect replacement for the one that wore out.
Not my first order,got just what I wanted,will order from them again
Happy with the product AND at a really good price!!!
Super fast shipping! The gas spring fit perfectly!
Great job
The selection process was easy to follow. I needed gas struts with a greater lift capacity for our under bed storage due to the addition of a memory foam mattress. I was able to select a strut pair with the proper length and extension from the website. The struts were received quickly and were exactly what I needed. The bed now raises gently and remains elevated.
When my package arrived it was beat up and one of the clips on the end of the shock was missing,not what I would give a good report !!
Item was exactly as advertised, easy installation, fits perfectly on our RV door. Our previous gas shock was worn out & would not hold the door open. This product is sturdy & stable. It fixed the issue.
This strut did not fit precisely due to the thickness of the end connectors. They are thicker than the original strut and since the strut has to fit between the bottom of the door and the threshold in the closed position it would not allow the door to close. I found that by exchanging the end connectors with the original strut I was able to install the strut and close the door. The only problem with this solution is that the new strut with the old connectors is slightly longer than the old strut/connector assembly and now allows the door to open slightly farther than before. Our awning arm just barely clears the door when opening and closing so will have to be very careful from now on when extending and retracting the awning. Our motorhome is a Sunseeker 3010ds model in case this is helpful to others ordering this product.
Exactly what I needed for my Kwik Kamp motorcycle trailer! It's nice to share information in our group when we find parts to use for our discontinued campers.
Product is installed but instructions were a bit vague and difficult to implement(related to the removal of previous gas shock bar).
product works well, shipping took a little longer than I expected
Very fast delivery! I've ordered from e-trailer several times and service has always been great!
Thanks, now my tool box won't cut my arm off.
These work great for toolbox lid
The head that attached to the bottom door jamb was way to huge couldn't close the door I was able to switch the one from the old strut the thread size not the same I had to force it on most likely will pull off I ordered the 30 pound for my fifth wheel door if people ask the 20 pound model is the correct size but I chose the 30 pound my mistake
Price is right and product fit and functioned well for my application on a Leer truck topper rear glass door
This fit my 05 Bigfoot 9.6 camper door with about 3/8 compression left. This is the shock you want. It has a slow open feature and does not slam the door open possibly risking tearing the mounts off. So no worries about people who just open the door and head out. We used to have to coax the door open. Not you can let go of it. Love this shock!!
This company is excellent always willing to help with questions and always have items in stock. Shipping right on time and fair prices. Hats off for a company that stills has customers interest their top priority.
Thank you
Works great haven't had any problems with it, would buy again if I ever needed it
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.