Rock Tamers Mud Flaps Review - 2020 Ford F-250 Super Duty Video

Bill yes, the Brass Tire Sensors for TST TPMS #TST-507-RV-S2 will work great with your TST TPMS for RVs - Color Display - Signal Booster #TST-507-RV-4-C. These sensors were designed specifically to be used with that system as well as the 6 sensor…

We have a heat shield #RT76FR for applications like your 2017 Chevy Silverado 2500 where the exhaust points right at the flap of the part #ERT00108. This would be your ideal solution and would work well.

Yes, but it depends on your battery. In order to determine the amp draw of the Everchill RV Refrigerator w/ Freezer #324-000119, you will need to multiply the amp draw of the appliance by ta 24 hour time frame. The Everchill #324-000119 has an…

I spoke to my contact at Rock Tamers about using the Rock Tamers Heavy-Duty Adjustable Mud Flap System part #ERT00110 on your 2019 Ford F-250 and they stated that you would need to either have the rear parking sensors turned off or relocated as…

The Rock Tamers Heavy-Duty Adjustable Mud Flap System #ERT00110 will fit on your 2-1/2-inch ball mount so long as you have at least 1-inch of available space (as shown in the linked diagram). In terms of the exhaust you will want to use either the…

The Rock Tamers Heavy-Duty, Adjustable Mud Flap System, part #ERT00108 will work with the exhaust on your 2014 Ram truck. I have attached a photo that shows the system installed on a truck with rear exhaust like you said you have. The arms of the mud…

I suggest using heat shields #RT76FR with the rock tamers #ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.

The Rock Tamers Adjustable Mud Flap System, part #ERT00108, offers height, width and angle adjustment to match a range of vehicles. Please note that there must be at least 1-inch of clearance between the back of the ball mount face and the trailer…

The raised square plates on shank of the Curt Adjustable 2-Ball Mount part #C45902 are present on older versions of the ball mount but not all. The new version of this ball mount has the smooth shank like you have mentioned. The version of this ball…

Yes, the Curt locking pins #C23556 will work great for the Curt Adjustable 2-Ball Mount #C45902. I was able to go out to the warehouse and confirm the fit for you.

Your factory OEM 5th Wheel Towing Prep Package should be setup with the 21,000 lb, model DM8550037. If this is the case the Replacement Side Plates for Demco Hijacker Autoslide 5th Wheel Trailer Hitches - Underbed Mount, part #DM6004, will work with…

I suggest the Underbed Rail and Installation Kit for Demco Hijacker UMS 5th Wheel and Gooseneck Trailer Hitches Item #DR37FR. This custom fit, under bed rail kit allows for uninhibited use of your truck bed once your hitch is removed. Works with…