Hayes Brake Controller - Time Delayed Controller - HA81760 Review Video

If you Sidewinder is locked out meaning it can't pivot to either side and essentially works like a standard pin box it can be used with your Convert a Ball adapter #CAB-C5GX1216 but if your Sidewinder is not locked out it would not be a safe…

The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset #CAB-C5GX1216 is a great adapter and with the offset you will gain a lot of maneuverability on a short bed truck when in tight area's. There are Interior polyurethane cushions…

To install the Redarc Tow-Pro Liberty Trailer Brake Controller #RED24FR you were looking at all you will need is the Plug-In Adapter #RED39FR. This will plug into the controller of the #RED24FR and then plug directly into the factory trailer brake…

On your 2010 Ford Explorer Sport Trac the factory plug for your brake controller will be located under the dash, on the left side of the steering wheel, just above your left leg. The wiring adapter you will need to connect the Draw-Tite Brake…

The Hayes Engage Trailer Brake Controller - 1 to 3 Axles - Time Delayed #HA81760 you were looking at will work perfectly with your HydraStar Electric Over Hydraulic Brake Actuator #HBA-10. This controller will still work even though your #HBA-10 is a…

On your 2018 Toyota Sequoia the factory brake controller plug is located underneath and to the left of the steering column, taped to another harness near the emergency brake pedal. There will be a 5-pin connector that mates with the one on harness…

When it comes to installing The Redarc Tow-Pro Liberty #RED52VR if there is no trailer connected, the active calibration may occur as normal without any indication from the LED., provided your brake light trigger point is active when there is no…

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

Your answer depends on what connector you have. If the Ranger has a factory-installed 7-way it should have a standard brake controller connection port above and to the left of your left knee when seated; this will be near the kick panel. If the truck…

I was able to find the install manual for the Valley Journey HD brake controller and attached a screenshot of it that shows what all of the error codes are for it. None of the codes look like an O and a backwards 7, but maybe you can see which one…

I wish we had a custom fit for your Sterling, but the best option we have is the Buyers Products gooseneck hitch plate part #3373014981. This all-steel assembly will need to be bolted to your truck frame and body.

If your 2003 Chevrolet Silverado 2500 HD has the factory installed hitch and a 7-Way connector, then all of the wires for the brake controller have been run. The factory brake controller port is located in the black box underneath the dash on the…