Review of Gen-Y Hitch Trailer Hitch Ball Mount - Replacement Shank - 325-GH-505 Video

The tongue weight of a trailer depends on the size of the trailer and how it is loaded. Typically, the tongue weight is 10 to 15 percent of the weight of the trailer in its fully loaded ready-to-tow condition. You can use a tongue weight scale like…

I do have a solution for you, however I do not recommend using the Roadmaster Dual Hitch Receiver #RM-077-10 in conjunction with the High-Low Adapter #RM-048-10 that you already have. Using an adapter with another adapter like this will cause a…

The Gustafson RV Puck Light #277-000343 can be used with a dimmer switch but the dimmer switch needs to be designed for use with LEDs. Otherwise if you use a non-LED dimmer when you go to dim the lights they might flash and make a weird noise at the…

What Gen-Y said is correct, and this is the best solution for a problem like yours. The Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 7-1/2" Drop/Rise - 16K #325-GH-504 will not reduce your tongue weight capacity at all. It…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

I don't have a way to add a second receiver to the Blue Ox Adjustable Drop Hitch Receiver Adapter part #BLU28XR but if you like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part #325-GH-214 option, there's another more cost…

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

On the Convert-a-Ball cushioned ball mount #AMSV10 from the center of the hitch pin hole to were the nearest part of the drop is approximately 4-1/4 inches. This amount can very slightly depending on the welds. I have edited your picture to show…

Yes, there actually is a front hitch option available for your 2019 RAM 2500, the Curt #C31015. There's a small portion that will need to be trimmed on your front bumper. I have attached a picture that shows where you'll need to trim along…

For a 2-inch hitch the longest hitch extensions we offer are the 60-inch #TLE1560 and 48-inch #TLE1548, both from TorkLift. However, these only work along with a TorkLift brand SuperHitch dual-receiver type hitch that has the strength and included…

For your Karavan trailer I recommend LED tail lights #STL57RB and #STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked…