Review of Flint Hill Goods - Roof and Truck Bed Extender - FHG89ZR Video

Since you're already wanting to utilize your truck bed for transporting your kayak I recommend picking up the Flint Hill Goods Truck Bed Extender #FHG89ZR as it allows you to secure and support the end of your kayak that hangs out the back of…

Yes the Prodigy P2 Brake Controller, #90885, can mount at a steep angle of 75 to 80 degrees. The P2 can be mounted from 0 degrees to 360 degrees vertically in the direction of travel. The front of the P2 must be level from side to side and it must be…

If you check out the video I've linked for you, you can see that when the bikes install, the front bike wheels are carried at an angle, so that the front bike wheels aren't taking up very much room at all between the tailgate and where the…

The Thule GateMate Pro Tailgate Pad for Full-Size Trucks #TH824PRO that you referenced does not have a weight capacity or a tire width limit so it would easily work great with a 75 lb e-bike with 4-inch wide fat tires.

The Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375lbs Item #MPG907 has load stops that can adjust from 28" to 48" so you'll have a very snug fit hauling your 4' wide plywood.

The longest option is going to be the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches #MPG907, which has a 53" length from the hitch pin hole to the furthest point on the extender. This extender comes with a 375lb load capacity…

The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar #RTL002 that you referenced is designed to be used with an existing roof rack crossbar system or bare roof carrier, which aren't included with the kit. If you want to go with a more…

To secure the Flint Hill Goods Truck Bed Extender #FHG89ZR and keep it stable I recommend using the Anti-Rattle Trailer Hitch Receiver Lock #63232. This not only has a locking hitch pin to keep the extender secured to your vehicle, but it also has a…

If the steel tubes weigh 140 lbs all together then I would at least try to seperate them on the driver and passenger sides of the roof rack on your 2017 Honda CR-V. The best option for weight displacement would be to put them evenly across the width…

For a truck bed extender with a bar wide enough to carry and haul something that is 38 inches wide you could use the Flint Hill Goods Truck Bed Extender - 2" Hitches #FHG89ZR which has a load bar that extends up to 48 inches wide.

In regards to installing a trailer wiring harness like the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56320 on a 2018 Ford Escape, you must run the power wire directly to the battery per the instructions. This…

I spoke with my contact at Curt regarding the issue you're having, and according to the folks at Curt what you have going on is almost certainly coincidental as the proper installation of the #C56320 wouldn't have any impact on the auto…