Yakima LongArm Bed Extender Review Video

I may have some solutions for you, but there are not any ladder racks available for a 2020 Honda Ridgeline and there are not any tonneau covers that are compatible with an over the bed style rack system. However, you can use a tonneau cover and…

At this point in time we haven't had the chance to install the Yakima LongArm Truck Bed Load Extender #Y01149 on a 2019 Ford Ranger, but we do have some dimensions on it that I think will be useful to you. If you check out the attached…

Although the Lock N Roll Articulating Trailer Coupler for 2" Receivers #336TS510 has a 5/8" pin hole to secure it to your trailer, you can definitely weld this to your trailer instead. Just be sure the work is done by a qualified…

The diameter of the crossbar on the LongArm Truck Bed Load Extender, Item #Y01149 is 2 inches. This is more designed for carrying kayaks like how I attached a picture of and not with a roof rack carrier. For what you are looking for the Rhino-Rack…

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll…

The Erickson Big Bed Load Extender #EM07600 has crossbars which are 48-1/2" when in use, and that dimension does not include the wings - or tie-down points - at the end of the crossbars. The 48-1/2" is usable space, so your…

The only way I can recommend a tongue extender for your trailer that has a 3 inch by 3 inch channel is to remove your current coupler, install the hinge kit part #FHDPW330300 in place of it and then install your coupler onto a length of 3 by 3…

If you're referring to the area shown in the picture of the Yakima LongArm Truck Bed Load Extender #Y01149, then that is not actually tape, but rather a tool we have here to simulate a hitch receiver and also weigh down the other end so the…

There are some measurements you will have to take to ensure the Yakima LongArm Truck Bed Load Extender - 2" Hitches - Aluminum - 300 lbs. part #Y01149, will fit your 2022 Hyundai Santa Cruz. If your vehicle meets these requirements, the…

I contacted Yakima about the LongArm Truck Bed Load Extender, Item #Y01149, and the crossbar has a 2 inch diameter and is 60 inches long. The LongArm also works with 2 inch x 2 inch hitches, has a weight capacity of 300-lbs, is adjustable, and has…

As of right now (April 2019) the Yakima OverHaul HD #Y01151-58 (68" crossbars) and #Y01151-59 (78" crossbars) are the only ladder racks confirmed to fit with your RetraxONE XR Hard Tonneau Cover w/ Trax Rails #RTT-60243 (5-1/2' bed) or…

We have the exact parts you need to add a rack system to your 2019 Ram 1500 with a 5-1/2 foot bed and the RetraxONE XR Hard Tonneau Cover with Trax Rails #RTT-60243: - Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…