Review of Extang Replacement Tonneau Covers Slide Block - EX1077 Video

Thanks for the information, Luke! The Extang Revolution Soft Tonneau Cover EX54430 is the correct part number for your 2011 Ram 2500 short bed, and although it's been discontinued, the replacement tarp is part #EX53430 on our site.

We have replacement end caps for the Extang Revolution tonneaus with part #EX94VR for if it's on the driver side or part #EX34VR if it's on the passenger side.

I would be happy to help you find a replacement cover for your 2012 Ram 1500. I just spoke with my rep at Extang and he gave me two replacement options for you and told me the covers for the Extang Revolution series only come in vinyl. The first is…

You will need the Replacement Tarp #EX53780 for the Extang Revolution Soft Tonneau Cover 54780 that fits your 2011 Ford F-150 with the 6-1/2' bed.

We do indeed offer a replacement tarp for the Extang Revolution tonneau cover for a 2013 Ram 1500 6-1/2 foot bed (no Rambox). You'll need the #EX53430 replacement tarp.

I reached out to my contact at Extang and the front corner raising is a sign of the clamps not being installed correctly. He said you will want to remove the front clamp by removing the knob and then rotating the body up until the thread shows only…

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…