Replacement Tarp For Extang Revolution Soft Tonneau Cover 54780 On 2011 Ford F-150 w/6-1/2 Foot Bed

Question

Question:

Looking for Replacement Tarp For Extang Revolution Tonneau Cover on 2011 Ford F150 with 6-1/2 Foot Bed

asked by: John G

0

Expert Reply:

You will need the Replacement Tarp # EX53780 for the Extang Revolution Soft Tonneau Cover 54780 that fits your 2011 Ford F-150 with the 6-1/2' bed.

expert reply by: Bud M

0

Answer 1

Thanks for the information, Luke! The Extang Revolution Soft Tonneau Cover EX54430 is the correct part number for your 2011 Ram 2500 short bed, and although it's been discontinued, the replacement tarp is part #EX53430 on our site.

view full answer...

Answer 2

I would be happy to help you find a replacement cover for your 2012 Ram 1500. I just spoke with my rep at Extang and he gave me two replacement options for you and told me the covers for the Extang Revolution series only come in vinyl. The first is…

view full answer...

Answer 3

We have replacement end caps for the Extang Revolution tonneaus with part #EX94VR for if it's on the driver side or part #EX34VR if it's on the passenger side.

view full answer...

Answer 4

I can; you are 100 percent correct that the replacement tarp for the Extang Revolution 54425 tonneau cover is the following part number: - Replacement Tarp for Extang Revolution Soft Tonneau Cover #EX53425

view full answer...

Answer 5

We do indeed offer a replacement tarp for the Extang Revolution tonneau cover for a 2013 Ram 1500 6-1/2 foot bed (no Rambox). You'll need the #EX53430 replacement tarp.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...