Replacement End Caps for Extang Revolution Tonneau

Question

Question:

Good afternoon. I am looking for bow end cap for Extang Revolution tonno part no 1087. Do you have a part no for me? Thanks.

asked by: Debert G

0

Expert Reply:

We have replacement end caps for the Extang Revolution tonneaus with part # EX94VR for if it's on the driver side or part # EX34VR if it's on the passenger side.

expert reply by: Jameson C

0

Answer 1

Thanks for the information, Luke! The Extang Revolution Soft Tonneau Cover EX54430 is the correct part number for your 2011 Ram 2500 short bed, and although it's been discontinued, the replacement tarp is part #EX53430 on our site.

view full answer...

Answer 2

I would be happy to help you find a replacement cover for your 2012 Ram 1500. I just spoke with my rep at Extang and he gave me two replacement options for you and told me the covers for the Extang Revolution series only come in vinyl. The first is…

view full answer...

Answer 3

You will need the Replacement Tarp #EX53780 for the Extang Revolution Soft Tonneau Cover 54780 that fits your 2011 Ford F-150 with the 6-1/2' bed.

view full answer...

Answer 4

We do indeed offer a replacement tarp for the Extang Revolution tonneau cover for a 2013 Ram 1500 6-1/2 foot bed (no Rambox). You'll need the #EX53430 replacement tarp.

view full answer...

Answer 5

Because you mentioned having a support bow, there are only certain brands that have a cover like that for your 6 foot bed. If you have the Extang Tuff Tonno Soft Tonneau Cover - Snapless J-Strip - Roll Up - Vinyl #EX14915 you will need replacement…

view full answer...

Answer 6

You are correct about the function of the Replacement Bow Clip Assembly for Extang Revolution Soft Tonneau Cover #EX89FR. This part is the same as 1083, and as you can see by the accompanying cut out of the linked installation instructions, this…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Replacement End Caps for Extang Revolution Tonneau

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching