Replacement Tarp For Extang Revolution Tonneau Cover on 2013 Ram 1500 with 6-1/2 Foot Bed

Question

Question:

What is the part number for an Extang Revolution replacement tarp for a 6’4” bed? Thank you

asked by: Guy R

0

Expert Reply:

We do indeed offer a replacement tarp for the Extang Revolution tonneau cover for a 2013 Ram 1500 6-1/2 foot bed (no Rambox). You'll need the # EX53430 replacement tarp.

expert reply by: Mike L

0

Answer 1

Thanks for the information, Luke! The Extang Revolution Soft Tonneau Cover EX54430 is the correct part number for your 2011 Ram 2500 short bed, and although it's been discontinued, the replacement tarp is part #EX53430 on our site.

view full answer...

Answer 2

I would be happy to help you find a replacement cover for your 2012 Ram 1500. I just spoke with my rep at Extang and he gave me two replacement options for you and told me the covers for the Extang Revolution series only come in vinyl. The first is…

view full answer...

Answer 3

We have replacement end caps for the Extang Revolution tonneaus with part #EX94VR for if it's on the driver side or part #EX34VR if it's on the passenger side.

view full answer...

Answer 4

You will need the Replacement Tarp #EX53780 for the Extang Revolution Soft Tonneau Cover 54780 that fits your 2011 Ford F-150 with the 6-1/2' bed.

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 6

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Replacement Tarp For Extang Revolution Tonneau Cover on 2013 Ram 1500 with 6-1/2 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching