Review of Draw-Tite Hitch Adapters - 3 Inch to 2-1/2 Inch Reducer - 58552 Video

I have included an image with the dimensions of the Gen-Y Hitch Anti-Rattle Reducer Sleeve #GY22YR. This will help you to determine if you will have enough room to fit your mud flaps with your specific receiver and hitch.

In order to use the Strait-Line Weight Distribution System part #RP66075 with a 3" trailer hitch you'll need the Equalizer Weight Dist Shank part #EQ90-02-4800 and the Draw-Tite Reducer Sleeve part #58552. There isn't a weight…

You do not want to modify the hitch or vehicle to get the hitch to fit. Doing so can do more harm than good. There are a couple of things you can try. First, try starting the installation with the bolt hole that is giving you trouble. It could be…

In regards to the Buyers Products 3" to 2" Receiver Tube Adapter part #337RTA302 which is a great option for a Ford F-350, the adapter will actually reduce the towing capacity of the trailer hitch and vehicle while in use to 12,000 lbs of…

No, the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 is a hardwire installation and will not activate the towing mode of your 2023 Mazda CX-50.

We do offer a range of trailer hitch options for your 2012 Toyota Tundra Rock Warrior TRD. Since your factory-installed hitch has been damaged you'll naturally need to remove this entirely. After doing so I suggest you very carefully inspect the…

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

Hi Robin, Yes, you can absolutely use the 2" Equal-i-zer Weight Distribution Shank #EQ90-02-4600 with the Blue Ox SwayPro Weight Distribution #BXW2000. The hole spacing on the Equal-i-zer shank is the same as the Blue Ox shank which is why they…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…