Aftermarket Hitch for 2012 Toyota Tundra Rock Warrior TRD with Damaged Factory-Installed Hitch
Question:
Is there an option for this truck outside factory replacement $1500.00. Factory hitch was missing 4 bolts and when I backed into tree rear brackets of hitch buckled and broke craziest thing I have ever seen with a hitch to be honest. Assuming the issue with after market hitch is the fact that the bumper on this model bolts to the hitch itself? Im open to any suggestions and options at this time. Thanks.
asked by: Ken H
Helpful Expert Reply:
We do offer a range of trailer hitch options for your 2012 Toyota Tundra Rock Warrior TRD. Since your factory-installed hitch has been damaged you'll naturally need to remove this entirely.
After doing so I suggest you very carefully inspect the OEM hitch's attachment points on the frame rails to ensure no vehicle damage was sustained when the hitch was broken. I would also check that the threads in the frame's weld nuts (that accept the hitch installation bolts) were not damaged in the impact. If these attachment points have any thread damage you will need to have new weld nuts installed by a qualified welder. Any hitch will deliver its rated capacity only when installed exactly as specified by the manufacturer and only when mounted on a vehicle frame that is in good condition.
The link at right will show you all available classes of 2-inch trailer hitches offered for your truck. Please note that several are excluded based on the presence of your TRD Sport Package. For your truck you have hitch options in Classes III, IV and V.
In a Class III hitch we offer the Draw-Tite # 75527. In a Class V hitch we offer the part you referenced, Curt # C15398. Draw-Tite also offers a Class IV & V Hitch # 41935. Although all are 2-inch receivers their trailer tongue weight and towing capacities vary. Every hitch includes all required installation hardware.
At right you will find links to a hitch installation video and also to two articles that provide helpful guidance for hitch installation.
Products Referenced in This Question
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1200 lbs TW
- 12000 lbs GTW
- 14000 lbs WD GTW
- 2 Inch Hitch
- 1400 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2400 lbs TW
- 16000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Comparing Draw-Tite and Curt Trailer Hitches for the 2013 Toyota Tundra
- Q&A: Replacement Mounting Hardware for a Trailer Hitch on a 2013 Toyota Tundra
- Q&A: Will the Draw-Tite Hitch Replace the Factory Hitch On a 2010 Toyota Tundra With Aftermarket Bumper
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: 2010 Toyota Tundra Hitch Capable of Towing 12.000 Pounds
- Shop: Trailer Wiring
- Shop: Trailer Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
- Video: etrailer Trailer Hitch Receiver Reducer Sleeve Review
- Q&A: Mounting Holes on Trailer Hitch Do Not Line Up with Holes on Frame of 2013 Toyota RAV4
- Q&A: Is it a Good Idea to Use More Than One Hitch Adapter?
- Shop: Brake Controller
- Search Results: reese towpower 74378 pilot brake controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Crosstrek
- Shop: Suspension Enhancement